bella9 Posted July 23, 2011 Share Posted July 23, 2011 hi guys i am having some trouble with my pv , it was fine a few days ago ,but i turned my key about an hour ago and i couldnt hear my pv servo ,so i striped it down made sure everyting was connected ,wich everthing was so i started it and went on it and its flat until i get to about 35-40 then it starts to kick in so i was just wondering do i need a new pv unit any help would be great thanks Link to comment Share on other sites More sharing options...
Moderator Airhead Posted July 23, 2011 Moderator Share Posted July 23, 2011 did you leave some (just a little) slack in the cables? I would take out the PV and clean it up with a rag and white spirit, could be gunged up? Try disconnecting the cables and see if it feels locked up Link to comment Share on other sites More sharing options...
Moderator mervin Posted July 24, 2011 Moderator Share Posted July 24, 2011 sounds like the PV controller or motor has died , my TDR did this recently, the Reg rec died and put a high voltage through everything blew bulbs rev counter CDi Pv unit the lot , and the symptoms where very similar to yours Link to comment Share on other sites More sharing options...
Recommended Posts