danzley0 Posted July 11, 2011 Posted July 11, 2011 the pipe that connects to the bottom of the carb is cracked a yamaha dealer says the part is £99.00 plus £61.00 to fit it as far as i can tell this is a plastic tube with 2 attachments for what look like fuel pipes and 3 bigger attachments 1 for each of the 2 cylinders and a connection to the carb is there any way i can get a cheaper version of it by the way it looks like i have to take off the tank all the hoses the air intakes and possible the exhaust can anyone advise me?
Moderator DirtyDT Posted July 11, 2011 Moderator Posted July 11, 2011 Fuel or air Dan? Is it leaking?
NEV Posted July 11, 2011 Posted July 11, 2011 Fuel or air Dan? Is it leaking? You're getting to sound more like Yoda every day DT
Moderator DirtyDT Posted July 11, 2011 Moderator Posted July 11, 2011 You're getting to sound more like Yoda every day DT Like him I look. Sound like him I well as might.................
neversaydie Posted July 11, 2011 Posted July 11, 2011 the pipe that connects to the bottom of the carb is cracked a yamaha dealer says the part is £99.00 plus £61.00 to fit it as far as i can tell this is a plastic tube with 2 attachments for what look like fuel pipes and 3 bigger attachments 1 for each of the 2 cylinders and a connection to the carb is there any way i can get a cheaper version of it by the way it looks like i have to take off the tank all the hoses the air intakes and possible the exhaust can anyone advise me? Yuo could try places like Wemoto, but even if they were able to supply, i reckon the price will be similar. Try bike breakers, and ebay
danzley0 Posted July 11, 2011 Author Posted July 11, 2011 i think its air its the really thick tube between the 2 the carbs sit ontop of it
Moderator Airhead Posted July 11, 2011 Moderator Posted July 11, 2011 What the hell is this pipe Dan?
danzley0 Posted July 11, 2011 Author Posted July 11, 2011 will take photo tomorrow but its the tube that the carb attaches to the carb sits ontop of it and there is 2 small what look like air lines and it links the 2 cylinders together
Kelum Posted July 12, 2011 Posted July 12, 2011 He's referring to this I guess. I have seen cheaper versions of this on ebay. However, by some means if you could make a metal version of it, it will last longer..I dont see a reason why Yamaha has put a plastic one instead of a lasting metal one.. Mine is getting cracks too I think I will have to buy one.
Moderator Airhead Posted July 12, 2011 Moderator Posted July 12, 2011 ..... ....... It's an intake or inlet manifold then
danzley0 Posted July 12, 2011 Author Posted July 12, 2011 ive found some sealing tape and gel i will let you know how it goes would go from £98.00 to £20.00 bike shops always tell you you need a new part will let you know the name etc of it hopefully tonight
Moderator Airhead Posted July 12, 2011 Moderator Posted July 12, 2011 http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=330580120886&clk_rvr_id=247113167401&item=330580120886&lgeo=1&vectorid=229508
Kelum Posted July 12, 2011 Posted July 12, 2011 ive found some sealing tape and gel i will let you know how it goes would go from £98.00 to £20.00 bike shops always tell you you need a new part will let you know the name etc of it hopefully tonight Thats a good idea mate, try strengthening it up..
danzley0 Posted July 12, 2011 Author Posted July 12, 2011 all 5 of them inlets have gone ive been told this is made of rubber/ plastic and is apparently not serviceable although it doesnt expand or shrink so i was thinking coat it in chemical metal do the jubilee clips up before it dries and see how it goes although apparently it will start mis firing before you have a huge problem
Moderator Airhead Posted July 12, 2011 Moderator Posted July 12, 2011 Dan you could send a message to the ebay seller mentioned, ask if they will list more soon?
Moderator DirtyDT Posted July 12, 2011 Moderator Posted July 12, 2011 Dan you could send a message to the ebay seller mentioned, ask if they will list more soon? I would do the same. Until then I would look at using a soft rubber specialist glue. If it leaks the bike will run lean. It does seem to say that it is a shared part with the 250 so this may be worth looking at LINKY
danzley0 Posted July 17, 2011 Author Posted July 17, 2011 part ordered ebay seller listed 5 more 1 left if anyone needs one for a spare
danzley0 Posted July 22, 2011 Author Posted July 22, 2011 inlet manifold arrived today fits perfectly recommend this to anyone with a virago/dragstar
Recommended Posts