Moderator Cynic Posted June 12, 2011 Moderator Share Posted June 12, 2011 Hi all got my wheels, thing is there is there is powder coat on the disc mount. Anybody got any tips on removing the powder coat from the face. Or is it just a case of persevere with a razor blade? Link to comment Share on other sites More sharing options...
NEV Posted June 12, 2011 Share Posted June 12, 2011 Hi all got my wheels, thing is there is there is powder coat on the disc mount. Anybody got any tips on removing the powder coat from the face. Or is it just a case of persevere with a razor blade? Well you know me mate, am a big believer in an electric drill, and a wire wheel or cup attatchment, takes paint/enamels off no probs, not sure about powdercoating mind, but maybe give it a go on a place not so visible, bit less time consuming than a razor blade too hope this helps. Link to comment Share on other sites More sharing options...
Moderator mervin Posted June 12, 2011 Moderator Share Posted June 12, 2011 Mask the area you do not want stripped with duck tape and apply paint stripper, that will soften it enough too scrape it off easily merv Link to comment Share on other sites More sharing options...
Moderator Airhead Posted June 12, 2011 Moderator Share Posted June 12, 2011 Mask the area you do not want stripped with duck tape and apply paint stripper, that will soften it enough too scrape it off easily merv +1 for the nitromors, it works well. Goes without saying to be careful not to splash or drip it anywhere else...Dohh I just said it! Link to comment Share on other sites More sharing options...
Moderator Cynic Posted June 12, 2011 Author Moderator Share Posted June 12, 2011 Cheers lads i'll give it a go when i get in from work. Really got to be carefull here. Can't remove any eatra metal or the disk may not run true, same goes for leaving any powder coat on. Its in full view so i nead to be neat. If it takes a week with a razor blade so be it. Link to comment Share on other sites More sharing options...
Recommended Posts