NEV Posted October 31, 2012 Author Share Posted October 31, 2012 Well they say a picture paints a thousand words, so heres a little project I'm on at the minute A 92 TZR 4DL2 Belgarda engine, with a 4mm oversized Wossner DT piston, 38mm Keihin carb, mated up with a 4DL CDI,allowing the revs to get to 13k, just need a DTR frame with a V5, and it'll be good to go. It'll either go bang, or will go like fook Uploaded with ImageShack.us Uploaded with ImageShack.us Uploaded with ImageShack.us Link to comment Share on other sites More sharing options...
Moderator YamaHead Posted October 31, 2012 Moderator Share Posted October 31, 2012 Link to comment Share on other sites More sharing options...
dt502001 Posted November 1, 2012 Share Posted November 1, 2012 Hey Nev your were looking at the pipes on the TDR 250 and thinking about putting them on this project and from what i hear you can't realy get them. Check out U tube about hydro forming pipes I have been looking at some of the vids and it's looking not so hard, got a little rm 80 that the pipe is rotten and I can measure it up for the template if I find time to do it I will post it up. PS been watching and you do nice clean work Link to comment Share on other sites More sharing options...
NEV Posted November 1, 2012 Author Share Posted November 1, 2012 Cheers DT much apreciated. This is the 4dl exhaust I'll be needing, I'll put a shout out in the wanted section also, just incase someone has one kicking about somewhere Link to comment Share on other sites More sharing options...
NEV Posted November 16, 2012 Author Share Posted November 16, 2012 Got the rebored barrell back yesterday, all specs to stage 3 now, and had a new liner put in for the 4mm oversized Wossner piston Weird scoops are to keep the bridges/edges of the port cool with fresh cool mixture to stop seizures, and rear 7mm hole for better lubrication, has been suggested, certainly not seen the scoops on other pistons Link to comment Share on other sites More sharing options...
Consmos Posted November 17, 2012 Share Posted November 17, 2012 Where did you get the fork covers Nev? I'm in the midst of a total amateur job on my dt and trying to spruce it up a little while i'm at it, might as well while it's in pieces! I can't believe what a pro job you've done on that wee ride, pure awesome Link to comment Share on other sites More sharing options...
Consmos Posted November 17, 2012 Share Posted November 17, 2012 I should have been more specific there - I was looking at your dt125 pages when I posted that! Link to comment Share on other sites More sharing options...
NEV Posted November 17, 2012 Author Share Posted November 17, 2012 Cheers Consmos, The Monster Energy neoprene fork covers on the Black/Green bike I got off Ebay, Acerbis also do them, I've just bought some for the White/Green 89DTR, around £20 if I remember right, again a search on Ebay should bring some up. If you need a hand with any more info just give us a shout. Link to comment Share on other sites More sharing options...
Annihilator236 Posted February 5, 2013 Share Posted February 5, 2013 all i can say is.... WOW! that is awesome work man, if i had even a bit of the skill you have my DT project might not be so bad after all Link to comment Share on other sites More sharing options...
NEV Posted February 5, 2013 Author Share Posted February 5, 2013 Cheers bud, appreciate that, just keep at it, you'll get there in the end, when ya stood back, arms folded and bikes ticking over nicely, you'll know you've done a proper job. Link to comment Share on other sites More sharing options...
Calum122 Posted May 20, 2013 Share Posted May 20, 2013 Absolutely love this build NEV. Gave me such an inspiration to start mine Link to comment Share on other sites More sharing options...
NEV Posted May 20, 2013 Author Share Posted May 20, 2013 Thanks Calum, looking at how you've done such a top job on your bike, you should be really proud of what you've achieved. Link to comment Share on other sites More sharing options...
NEV Posted February 17, 2014 Author Share Posted February 17, 2014 Have had about 4 or 5 people saying they can't find this project thread, so have bumped it back from the nether regions, nice to see it is still getting a fair bit of attention. Link to comment Share on other sites More sharing options...
Albertus Posted July 12, 2015 Share Posted July 12, 2015 Admins, kindly delete this post if deemed inappropriate.AlEdited by DDT: Thank you, I have. Link to comment Share on other sites More sharing options...
NoviceNick Posted September 15, 2015 Share Posted September 15, 2015 Thanks Calum, looking at how you've done such a top job on your bike, you should be really proud of what you've achieved. Hi NEV, Loving your work. I have just discovered the thread today and noticed that none of the earlier photos work. Do you have them stored online anywhere else. it would be great to see. Also - I have a feeling im going to have many questions for you on my project. hope that's ok Cheers, Nicky Link to comment Share on other sites More sharing options...
slice Posted September 15, 2015 Share Posted September 15, 2015 (edited) Nicky this thread was started in 2011, he's probably deleted the photos from here ages ago, not always a wise move to open threads that are this old. Check the start date of the thread before you make a reply as the member might not still be on here, NEV is actually still around on occasion. Send him a PM if you really want to see the photos and I'm sure he will be ok about letting you see them if he still has them. Edited September 15, 2015 by slice Link to comment Share on other sites More sharing options...
NoviceNick Posted September 15, 2015 Share Posted September 15, 2015 Noted. Apologies Link to comment Share on other sites More sharing options...
Recommended Posts