Jump to content

O rings and washers for pilot screw

phil63146
phil63146
in Yamaha Workshop

Featured Replies

Posted

Where can I find the flat washers and O-rings that fit on the pilot screw (air mixture screw) on the Mikuni carburetor. All of the items are about 5mm on diameter. Thanks in advance. Phil

  • Quote
    • Author

    I have a question you might be able to answer. On the pilot screw is there just one O-ring and washer per screw or two washers with a O-ring in between? If just one, I assume the washer goes against the spring (dumb ? I know). Thanks for the lead but I'm hoping to find someone on the west side of the pond.

  • Quote
    • Moderator

    Sorry i am not familiar with the XS carbs but Drewpy will be along in a minute or someone that knows XS,s

    and I did not realise you where the other side of the pond so try SUDCO

  • Quote
    • Author

    Sorry i am not familiar with the XS carbs but Drewpy will be along in a minute or someone that knows XS,s

    and I did not realise you where the other side of the pond so try SUDCO

    Found them from another owner. Thanks

  • Quote

    • Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.

    Guest
    Reply to this topic...
    Go to topic listing