ed209 Posted February 21, 2011 Posted February 21, 2011 Sup Everyone, I've recently bought a WR125x for commuting to work and I'd like to fit some handguards, can anyone recommend any? Ed
phil90 Posted March 1, 2011 Posted March 1, 2011 Sup Everyone, I've recently bought a WR125x for commuting to work and I'd like to fit some handguards, can anyone recommend any? Ed Hi, I have just fitted these to my wr125. Had to trim a little for the cables but other than that fits great. You will also need to buy the mounting kit to go into the bars and a 14mm drill bit to drill the bars out. Sounds harder than it is but mine went on a treat.. http://cgi.ebay.co.uk/Polisport-Sharp-Bark-Buster-Left-Hand-Side-Yamaha-Blue-/320663156521?pt=UK_Motorcycle_Parts&hash=item4aa9037729#ht_500wt_949 Hope this helps...
ed209 Posted March 4, 2011 Author Posted March 4, 2011 I went with a pair of Acerbis Rally II in the end which just arrived today so I might try fitting them tomorrow. Thanks for the replies!! http://www.acerbistore.it/product.aspx?ID=289&C=155&L=2
blackhat250 Posted March 4, 2011 Posted March 4, 2011 Welcome ,,,, Ed, thats a tidy little Super moto YAM ,,,,,
ed209 Posted March 5, 2011 Author Posted March 5, 2011 Ok I've just removed the end of one of my grips and theres an insert inside the handlebar which make it too narrow for the mounting kit that come with the Acerbis Handguards.
phil90 Posted March 29, 2011 Posted March 29, 2011 Have to drill them out with a 14mm drill bit... pretty easy with a sharp drill bit and decent drill.. hope this helps.. (sorry for late reply)
Recommended Posts