CameronMac Posted February 10, 2011 Share Posted February 10, 2011 So as I'm still waiting on my 175's barrel to come back, I got looking at my brother in laws DT 400. I was thinking, would I be able to swap the 400 engine into my frame? Would it be easier if I were to just swap the 175's electronics over? It's been talked that I might get the entire bike given to me so the thought's been playing around in my head lately Link to comment Share on other sites More sharing options...
Moderator mervin Posted February 10, 2011 Moderator Share Posted February 10, 2011 Well Cameron my theory has always been anything is possible with a big hammer and a welder, but to be honest if DT,s are as rare in Canada as they are here i would get both working instead of trying to make one good one from 2 and ending up with nothing of any real use Link to comment Share on other sites More sharing options...
Moderator Cynic Posted February 10, 2011 Moderator Share Posted February 10, 2011 Well Cameron my theory has always been anything is possible with a big hammer and a welder, but to be honest if DT,s are as rare in Canada as they are here i would get both working instead of trying to make one good one from 2 and ending up with nothing of any real use +1 Aside from which the 175motor has the rear sw arm flexing, with the 400 And ok as the brakes are, stopping a 400 Link to comment Share on other sites More sharing options...
Recommended Posts