WRpaddy Posted December 11, 2010 Share Posted December 11, 2010 Gents. Im after diagram of the engine in my WR125r. Theres a couple of parts i want to find out about. 1st is a little black "valve" type with a airpipe from the airbox through this "valve" into my exaust (just down from the manifold) This is just a guess but does it blow Cold air into my exaust to lower emmissions? If so surely this will reduce back pressure obviously reduceing power. Also can anyone reccoment me a full pipe for my bike? Many thanks Paddy Link to comment Share on other sites More sharing options...
hectic Posted March 14, 2011 Share Posted March 14, 2011 Hi Mate Look at this link it my just help you. http://www.cmsnl.com/yamaha_model8287/ Link to comment Share on other sites More sharing options...
Moderator mervin Posted March 14, 2011 Moderator Share Posted March 14, 2011 Gents. Im after diagram of the engine in my WR125r. Theres a couple of parts i want to find out about. 1st is a little black "valve" type with a airpipe from the airbox through this "valve" into my exaust (just down from the manifold) This is just a guess but does it blow Cold air into my exaust to lower emmissions? If so surely this will reduce back pressure obviously reduceing power. Also can anyone reccoment me a full pipe for my bike? Many thanks Paddy yes i had something like this on my honda Vigor,i asked the bloke at the local bike shop what it was all about apparently it is too fool people in to thinking the exhaust gases are cleaner, it introduces air into the exhaust and lowers the percentage of gas coming out of the other end, so does nothing really, i removed mine and blanked off all the holes to no detriment too the bike, it is just like adding water too beer makes it weaker but in this case you still get the same pollutants coming out just they a re spread around more Link to comment Share on other sites More sharing options...
Recommended Posts