Teflon-Mike Posted September 11, 2011 Author Share Posted September 11, 2011 Post Temporarily Removed - I dont feel like 'Sharing' with the world at the moment! Link to comment Share on other sites More sharing options...
Teflon-Mike Posted September 12, 2011 Author Share Posted September 12, 2011 Post Temporarily Removed - I dont feel like 'Sharing' with the world at the moment! Link to comment Share on other sites More sharing options...
NEV Posted September 12, 2011 Share Posted September 12, 2011 Looking good Mike, with hindsight theres a couple of things I now wish I'd powdercoated instead of spraying, the yokes and rear brake lever, are a couple I can think of, I see you used soap and water to clean down the engine, you are a braver man than me, I used a baby bath and parafin, and then sprayed afterwards with clean parafin in an old spray bottle, I wouldn't want any rust getting hold inside the barrel or ports, plus those wires coming out of the magneto, treat them with care they are old and easily broken within the protective plastic outer casing, as I found out to my peril, and £35 for a second hand stator. Keep up the good work mate. Nev Link to comment Share on other sites More sharing options...
Teflon-Mike Posted September 21, 2011 Author Share Posted September 21, 2011 Post Temporarily Removed - I dont feel like 'Sharing' with the world at the moment! Link to comment Share on other sites More sharing options...
Teflon-Mike Posted September 21, 2011 Author Share Posted September 21, 2011 Post Temporarily Removed - I dont feel like 'Sharing' with the world at the moment! Link to comment Share on other sites More sharing options...
Moderator Cynic Posted September 22, 2011 Moderator Share Posted September 22, 2011 - Rear brake pedal; return spring has been found, and fitted, and teh C-Clip to hold it on, fitted. Still needs a decent washer though; it can ride out & foul on kick-start. After losing 2 of those 'c' clips on the road i drilled mine and have a split pin performing retaining duties. Find it much more secure with a nice thick washer behind it. Link to comment Share on other sites More sharing options...
Teflon-Mike Posted January 17, 2012 Author Share Posted January 17, 2012 Post Temporarily Removed - I dont feel like 'Sharing' with the world at the moment! Link to comment Share on other sites More sharing options...
Teflon-Mike Posted January 17, 2012 Author Share Posted January 17, 2012 Post Temporarily Removed - I dont feel like 'Sharing' with the world at the moment! Link to comment Share on other sites More sharing options...
blackhat250 Posted January 17, 2012 Share Posted January 17, 2012 Well done mike " looks great, good step by step on the decals ,,, Link to comment Share on other sites More sharing options...
SnowTigeress Posted January 20, 2012 Share Posted January 20, 2012 Hi babes this is where you have been hiding..... Can you please take the yellow custard out the kitchen As want to get started on an engine,once that's done get the next project Link to comment Share on other sites More sharing options...
Teflon-Mike Posted January 23, 2012 Author Share Posted January 23, 2012 Post Temporarily Removed - I dont feel like 'Sharing' with the world at the moment! Link to comment Share on other sites More sharing options...
Teflon-Mike Posted February 10, 2012 Author Share Posted February 10, 2012 Post Temporarily Removed - I dont feel like 'Sharing' with the world at the moment! Link to comment Share on other sites More sharing options...
Teflon-Mike Posted February 10, 2012 Author Share Posted February 10, 2012 Post Temporarily Removed - I dont feel like 'Sharing' with the world at the moment! Link to comment Share on other sites More sharing options...
Teflon-Mike Posted February 10, 2012 Author Share Posted February 10, 2012 Post Temporarily Removed - I dont feel like 'Sharing' with the world at the moment! Link to comment Share on other sites More sharing options...
Teflon-Mike Posted April 4, 2012 Author Share Posted April 4, 2012 Post Temporarily Removed - I dont feel like 'Sharing' with the world at the moment! Link to comment Share on other sites More sharing options...
busyeddie Posted April 5, 2012 Share Posted April 5, 2012 Aah tef, good to see you back. Wondered if you had given up. Im just starting to rebuild mine at the moment. Have you checked out the dt club? They seem a good bunch. http://yamahadtclub.proboards.com/index.cgi?action=recent Ed Link to comment Share on other sites More sharing options...
Teflon-Mike Posted April 7, 2012 Author Share Posted April 7, 2012 Post Temporarily Removed - I dont feel like 'Sharing' with the world at the moment! Link to comment Share on other sites More sharing options...
NE0 Posted April 8, 2012 Share Posted April 8, 2012 You've done bloody well there mate, pat yourself on the back for a job well done. Good luck with the MOT, now all you have to do is ride it......................and learn how to take pictures in focus; some of those LEDs ones! :lol:! Link to comment Share on other sites More sharing options...
Moderator Airhead Posted April 8, 2012 Moderator Share Posted April 8, 2012 She lives!!! That was quite a journey mike...let us know how you get on when shes back on the trail Link to comment Share on other sites More sharing options...
Teflon-Mike Posted April 22, 2012 Author Share Posted April 22, 2012 She lives!!! That was quite a journey mike...let us know how you get on when shes back on the trail THAT unfortunately isn't going to happen. 1am this morning, I loked out the window while waiting for the kettle to boil and thought, "The cover's the wrong colour?" I was looking at a 'space' and seeing the pink cover over my other half's bike! STOLEN Registration: NUY640P Taken in Nuneaton, Warwickshire, United Kingdom. FAIRLY distinctive machine! With many unique and identifiable features, if ANY-ONE knows of its whereabouts, please contact Warwickshire Police Link to comment Share on other sites More sharing options...
Recommended Posts