Moderator drewpy Posted June 8, 2010 Moderator Share Posted June 8, 2010 Link to comment Share on other sites More sharing options...
johnsnownw Posted June 8, 2010 Share Posted June 8, 2010 That looks beautiful! Link to comment Share on other sites More sharing options...
HoughMade Posted June 9, 2010 Share Posted June 9, 2010 Nicely done....kind of cheesy in my eye, but seems like the work is well done. Link to comment Share on other sites More sharing options...
Moderator drewpy Posted June 9, 2010 Author Moderator Share Posted June 9, 2010 it was done to show off the powdercoating at aerocoat Link to comment Share on other sites More sharing options...
Campbell45 Posted June 30, 2010 Share Posted June 30, 2010 ive been wanting to get my engine powdercoated but I've heard that I shouldnt because it will run to hot. Have you had any problems? Opinions? Link to comment Share on other sites More sharing options...
Moderator mervin Posted June 30, 2010 Moderator Share Posted June 30, 2010 Campbell i do not advise it on an aircooled engine, i had many problems with my RD400 seizing til i fitted non coated barrels,i hadbought a set of coated rebored barrels at great expanse and they were knackered within 600 miles and my local powdercoaters that i use now said they would not touch an engine Link to comment Share on other sites More sharing options...
Campbell45 Posted July 6, 2010 Share Posted July 6, 2010 ugh darn my whole bike is either black or copper. Itll look really weird with silver there... Ive talked to alot of people and its an equal fight. some say no problems and others say dont do it. I'll prolly go with no powder just to be safe but man i wish i could have it black Link to comment Share on other sites More sharing options...
HoughMade Posted July 7, 2010 Share Posted July 7, 2010 it was done to show off the powdercoating at aerocoat ...and for that, it works well. Link to comment Share on other sites More sharing options...
2 Wheels Posted July 7, 2010 Share Posted July 7, 2010 Never herd of anyone that had it done, so have no experience of it at-all. Maby you could get the engine done in black BUT i would definately not do the barrels, for fear of overheating. Then you could clean up the barrels nice and shiney which Might look nice on top of a black engine, Just a thaught ! Link to comment Share on other sites More sharing options...
KirriePete Posted July 7, 2010 Share Posted July 7, 2010 ugh darn my whole bike is either black or copper. Itll look really weird with silver there... Ive talked to alot of people and its an equal fight. some say no problems and others say dont do it. I'll prolly go with no powder just to be safe but man i wish i could have it black What's wrong with using black heat resistant paint? Powder coat acts as insulation, whereas paint doesn't (some say it helps shed heat, maybe matt black .....) Clicky link Even BBQ paint from your local B&Q/Focus/Wherever will do the job - satin finish stuff on the nipper's TS50X exhaust looked the dog's danglies and stayed stuck on despite the heat. Link to comment Share on other sites More sharing options...
Moderator mervin Posted July 7, 2010 Moderator Share Posted July 7, 2010 powdercoat the casings that is ok i have done them with no problem but not the barrels, PJ1 engine is the best choice in my opinion, but plastikote barbecue or woodstove paint works the woodstove is matt and the barbie paint more satin Merv Link to comment Share on other sites More sharing options...
HoughMade Posted July 7, 2010 Share Posted July 7, 2010 I have paint on my barrels and have never had a heat issue or a durability issue. I've been riding in 90+ degree weather the last week. Link to comment Share on other sites More sharing options...
Recommended Posts