October 6, 200915 yr Moderator Download the DVLA PDF document here It has been subject to many threads and with no prejudice to anyone, here are the legal requirements of a bike number plate. Therefore as already mentioned in other threads if you decide to adjust your plate outside of the guidelines then you do so at your own risk... Letter height - 64mm Letter Width - 44mm Letter thickness 10mm Spacing - 10mm Group Space - 30mm Top Margin - 25mm Side Margin - 25mm Font should comply with BS AU 145d (these templates are held by dealerships and most sign makers) Group Spacing refers to the blocks of letters and numbers within the first and second part of your registration. Top and side Margin is the space between the outside of the plate and the start of the letters/numbers.
October 6, 200915 yr Moderator Download the DVLA PDF document here It has been subject to many threads and with no prejudice to anyone, here are the legal requirements of a bike number plate. Therefore as already mentioned in other threads if you decide to adjust your plate outside of the guidelines then you do so at your own risk... Letter height - 64mm Letter Width - 44mm Letter thickness 10mm Spacing - 10mm Group Space - 30mm Top Margin - 25mm Side Margin - 25mm Font should comply with BS AU 145d (these templates are held by dealerships and most sign makers) Group Spacing refers to the blocks of letters and numbers within the first and second part of your registration. Top and side Margin is the space between the outside of the plate and the start of the letters/numbers. yes but it's different for certain classic/vintage bikes which depends on year of registration!! drewps
October 6, 200915 yr Author thanks i just brought a 03 plate last night and the number plate looks smaller than a standerd one
October 6, 200915 yr Moderator thanks i just brought a 03 plate last night and the number plate looks smaller than a standerd one it no doubt is, change it or risk it?? up to you
October 6, 200915 yr Moderator yes but it's different for certain classic/vintage bikes which depends on year of registration!! drewps downlaod the PDF Drewps that will tell ya
October 7, 200915 yr Where'd you buy it? Approved place = Check it and get a refund. eBay or similar = If they claim it's legal, chase for refund. If not, tough.
October 8, 200915 yr My 125 failed its MOT (in part) due to the number plate as the letters were black with grey middle. Was a surprise to me as the bike was sold with it (different dealer). When I queried this with the MOT person, they said the law must have changed within the past year(?) and changed the number plate for free - mind the new number plate has a 10mm bit that protrudes below it that advertises the dealer (may take my jigsaw to it...) My brother's 125 had the same font (again bike bought with it already on) & passed its MOT (different dealer to the one that failed mine). And my friend's Ninja came brand new with the same two tone font... all bikes have standard size plates though & none of us have had problems with the police BUT...
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.