Collie
-
Posts
13 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Yamaha Racing News.
Media Demo
Store
Collections
Classifieds
Posts posted by Collie
-
-
Thanks. One slight concern is it's twitchiness when the throttle is put back on. Is this normal? I can cope, but sometimes it makes me nervous going round a sweeping corner and having to put it back on, especially in 2nd and 3rd gear. I hear other yammys have low rpm problems too. Thanks for the help
mine doesnt do that, just keep it screaming and dont let off mid bend thats a recipe for a tarmac butty!
-
-
-
-
are your pads getting low?
try some brake cleaner sprayed on to the pads disks etc, if not.
maybe a small fragment of stone or pad or something has lodged in there just pull them off and have a look
-
My bike has a slight misfire at about 5000rpm, its electronic ignition, what could this be do i need a new plug or lead and coil or what thanks Peter
-
sorted
-
hi i have a 1988 rxs100 and it uses a 6v electrics.
the other day my indicators started playing me up flashing too fast so i thought it was the relay swapped it still no better , check all bulbs and earthing connections, all seem fine do i need to rewire it or what please help me
ta peter
-
Hi i have an 1987/8 e reg rxs 100 and was wondering if any other engines are a simple conversion, i just want to go to 125 really for a bit more go. or can any one give me some advice on how to get a bit more top end from it. i can get a good 60 on the flat but it i have to leather it on the hills to keep pace with the traffic. thanks Col
-
try leaning off air fuel the mixture by turning the screw on your carb,not the idle screw the other one. just do it a 1/4 turn at a time . then run it for a day to assess if its any better . remember to make a note of where you started from,
-
is it possible to convert my rsx100 from 6v to 12v i realise i need to swap bulbs battery relays do i need to change the wirng loom
Or should i not bother.
i only want to do it because the head and tail lights are piss poor is there anything i can do other than convert i was thinking of ultra high intensity LEDs on the tail which will run on 6v but dont know what to do about the front head light
any help would be appriciated
Thanks Pete
-
RXS100
in Naked
Posted
just try to be a litle more gentle, the accelerator is not an off switch its more variable, remember smooth equals fast as that dude on top gear said