[YBR125 Bloody gearbox]

I've had exactly the same troubles as well, but now seems resolved (touches wood). Getting it into 1st from neutral is common but easily resolved by releasing the clutch til you feel it bite (even though the neutral light is on), bringing it in and sticking it into 1st. Works every time and there is a definite clunk as it goes into 1st.

The jumping from 2nd into neutral problem isn't really an isue any more - could be the adjusting of the gear lever (can't remember if it was adjusted up or down) or that I'm very positive (read firm!) with gear changes now. Either way, problem sorted mostly

Thanks I will try all suggested.cheers babe.

[YBR125 Bloody gearbox]

Im having problems with my bike and need a little advice.

1. sometimes when in neutral the gear shift won't go into first unless i roll the bike forwards.

2. sometimes when i take off and then change to second it goes into neutral (even with a good flick of my foot)

3. when i try to start the bike (with neutral light on)it won't, unless i turn the back wheel a little

Does anyone know what the problem may be and what to do to fix it, cheers

My ybr125 is doing something similiar.Mine goes into neatral instead of first then when I stop and come to set off again I can't get into first.It has happened at traffic lights afew times which is rally frustrating.My bike has to be knocked off,turned back on in neatral,electric starts ok then will slide into first to set off,a process which leaves people behind you annoyed because the lights have gone red again the time it takes to do thi.Why does this happen?have you found out? :