Jump to content

steved

Free
  • Posts

    22
  • Joined

  • Last visited

Posts posted by steved

  1. hello, could do with some advice please, i park my bike outside my house, where there are double yellow lines either side of the road . there is a gap between my house and the double yellow lines this is where i park , so far i have about 10 parking tickets. what rights do i have for parking there, anyone help?

  2. go up to about a 220-230, buy a few at one time and experiment, do a plug chop and find which jet works best for you.

    are you running any other mods?, K&N filter?

    i have earthed the wire for ypvs, tried to fit a filter but there is no room. what do you mean about plug chop?

  3. hi, could anyone help me please. i fitted a big one exhaust to my dt, i have been told i will have to upgrade the main

    jet. currently it has a standard #210 jet. any ideas anyone?

  4. ive just recently put a big one pipe on my dt, but im loosing power in 6th gear do i need it re jetting if so could anyone tell me what size jet to use currently it has a #210 main jet. can anyone help please

  5. Did you fit a bigger main jet in the carb when you did it? Did you fit a freeer-flowing air-filter? If so, fine tuning is required.

    If not, you've made the bike louder, which <> faster.

    hi i think your right it is louder and only a tad faster. have

    not fitted a bigger main jet, havent touched the air filter

  6. You will see a connector block behind the speedo with 3 cables going in one side and only 2 the other.

    The one thats singled out with nothing coming out the otherside i think its a green cable with a brown stripe? any way disconnect it or cut and then earth it onto the frame/yolks you'll notice a lot of a difference.

    cheers , will give it a go

  7. Tried earthing the cable behind speedo? that broadens 6th gear and makes it run through alot better.

    Otherwise you might find youself having to go into 5th all the time?

    what cable is it behind the speedo?

  8. Im not sure about big ones but the dep has a bung to block the pipe (once taken off metal pipe) and a cable tie to hide the hose above the carb in a safe place.

    hth

    cheers mate ,will give it a go

  9. Hiya mate,

    does this come from your air box,if so it's your hot air feed,wont do any harm plugging it at the air box end.This is assuming it's from your air box,check 1st

    cheers will check where its connected thanks for replying

  10. just changed my exhaust for a big one . need someone to help me on the original exhaust a pipe was connected to it i

    presume it is a breather pipe, on the new exhaust there is no where to put this. what can be done with this . please

    help as i dont know what what the pipe is and what it does and will leaving not connected damage anything.

  11. just fitted a new exhaust to my dt ( big one) and need some advice please .

    when i took the standard pipe off there was a hose or pipe that was connected

    to the exhaust.i dont know what it is or what it does.as ive just got back into bikes

    and things are different now on bikes.going back to the problem.the new pipe has

    no insert for the hose . what is it ,what does it do and what to do with it PLEASE HELP

×
×
  • Create New...