New Members Welcome Area

Hi all, I have just passed my A2 Licence and bought my first bike (Yamaha FZ6) Just need to get the thing restricted before im on the road but i cant seem to find a 47BHP 35KW restriction kit for it any help would be appreciated. Cheers Kyle

I'm a newbie to bikes and riding a ybr125 at the mo.

Hey I'm originally from Northern Ireland and now living in Georgia in the good ole US of A Ive been riding bikes since I was 16, raced for a few tears then became a race tech, ulimatley working with Robert Dunlop. Currently working on some ex factory superbikes that belong to Bill Brown, founder of Historic Moto GP. Please see my carb ID help question. Happy Thanksgiving to everyone!

Hello everyone. Just introducing myself to everyone. As of now I have a 2007 FZ6 and am currently doing a full rebuilt of a 1974 DT175 Enduro. Should have it done within a few months. I will be asking around for advice on various parts of that project and I am sure I will have other things to talk about as well. Thanks!

I am new and very much a rookie when it comes to these forums. I am from Cairns FNQ Australia. I have recently embarked on my first bike restoration of a 1975 DT 250 B, I am hoping that the collective knowledge of all of you can help me with my project. Sent from my iPhone using Tapatalk

Hi everyone out there,I'm new to all this type of forum but please bear with me as I'm a bit of a dinosaur. I've got in my garage a 1979 rd250 (air cooled) and Suzuki rf600. Last time on road was when I was about 17 (now about to turn 56) so thought about time I got back on the road so passed cut and theory now just got the rest to do. Wish me luck as will take test in a couple of months.

Hi there, looking forward to participating in this forum. Cheers. Some of the bikes Gee

Hello People, I am Leigh from Perth Australia. I have recently bought an AG100 1973 as a project bike. The bike runs ok however has a slight clunk in 3rd gear. At the moment just having fun riding it around. Will start to restore soon. So therefore I will be asking lots of questions in the future. Cheers Leigh

I just joined the Yamaha Owners Club - got an RD350 - and wanted to say hi to the other members. Never done anything like this before, only just got to grips with computer! Good init

Hi everyone. Im nick and live near northampton. New to drag star ownership and hoping to gain some knowledge from the site

Hi to everyone on here. Thought it best I give a little wave before driving you all mad I've recently returned to two wheels after a long break and managed to pick up a very nice 2001 xvs650 Dragstar for those nice sunny days. Turns out my short legs are not comfortable with the forward controls so will have to move them back along the bottom of the frame so if anyone has done this before I'd love to hear from you other than that the bike is in need of general fluid change and that's about it as it's only done almost 4k.

Hello, my names Adam, I've not long ago started riding, and my first bike is a 1998 Yamaha SR125. She's brilliant to ride and clearly been well looked after but she has a few problems arising from a newbie riding her, so I'm hoping to get some help on what the cause of the problems could be and get to work fixing her up. I've already started fixing the rust on her but there's still a lot of work to be done there... I'm hoping to move on to an XV950 when i take the big boy tests but until then i look forward to chatting to everyone about this little beauty! Adam.

Hello, I’m Dann from Scotland, new here.

Hi everyone, new to the forum, seems to be a super forum and a lot of decent members on here, My name is Marcus, I am currently riding a dt125r 1999. I am from Belfast, Northern Ireland, uk I have been riding bikes my whole live and recently stopped racing motocross that I raced since I was 7, I am now 19 So don't hesitate to pm me or speak to me if you have any more questions

hello all,,,i joined this site in september and ive olny just got round to doin this so,.. my names rob and im form leicester uk.. im 21 years young and currently have a dt125lc2 in the process off being restored to its former beauty what iv'e done so far; bought the bike for a mear £400.00 started up after two kicks and some fresh petrol took all the bits and bobs off which would allow me to examine the wiring loom took the flywheel off and the stator plate to check the lighting coils and igniton go to work with my electrical tester and found that one of my lighting coils where knackered sorted the lightin coils out by getting a coil of an old yam…

Hi everyone, I ride a yamaha ybr 55 plate. (My first road bike). I used to ride off road pit bikes as a kid. I am enjoying my first bike experience and really chuffed with the yamaha ybr. Built on a budget but have had no problems with the engine, touch wood. Having a top speed of just 65/70 mph I can't wait to get my self on a bigger bike! I have looked into buying a yamaha yzf125 as it's a mean looking bike, but will probably hold off and buy a cbr600. What do you think of these bikes? Any suggestions on customising the APPEARANCE of the ybr as it's not the best looking bike on the road (not the ugliest ever). Hope you enjoy my post and look forward to meeting som…

Hey All, Im Phil also known as juggyluggs on many other forums lol had my r6 a week and love it to bits such a hoot

Hello fellow bikers, l'm still new to bigger bike myself and got myself a 1996 Yamaha XJ600s Diversion which l been riding on when the weather been good (so some of you may understand, no one likes getting wet on a bike lol) l been riding my bike to work and on a few short trips in and around town mostly. l have done a longer trip over 180 miles in one day and have been happy riding it. I joined this site to hopefully meet new people that are up for a bike ride or few that are from Bristol or near by to see whats about and if need to ask for advice if have trouble with my bike, l can't fix (finger crossed). One thing l do like about riding my bike is that, when l see othe…

Hi All, Been a member for a good while but don't think I ever said hello. Not sober anyway or I'd remember. Probably.

Hi from Northern Ireland, i will be picking up a 1979 XS250 tomorrow which is basically a frame, 2 wheels, tank, engine on floor beside it, 2 boxes of parts and 2 exhausts. i will keep you all posted with some pics when i get it home and as i rebuild it. Will probably be looking for advice as i go along. Thanks