New Members Welcome Area

Hello, im new here at yamahaclub and i need some help My yamaha aerox 2002mod, the sylinder wont be cooled. i have full tank with liqiud, but the sylinder is getting so hot its smoking(this is a 70cc airsal t6 sylinder) its a new waterpump from stage6 on the engine so plz come with some advise to help me get it on the road again ! Thanks

Hi, I have a yamaha aerox YQ50, when i bought it, it has a standard exhaust on it, a few weeks later the exhaust blew and i had it replaced for a Leo Vince TT. Since then the bike has had a problem, when I slow down and get to around 5-10mph and accelerate again, the bike will bog down for about 20 seconds until it shoots off again, I have had the bike in the garage and the following had been checked: > Clutch and variation has been stripped, cleaned and checked > New rollers as the ones that came with my Leo Vince TT where not compatible with my bike > Throttle and Carb had been tuned and cleaned > The spark plug has been changed The mec…

Does anyone know where I can locate a side cover for a Yamaha CS5E. 1972?

Hello ! I`m new here, I`m from norway and got a Yamaha Dragstar 125 -Haadyr

Hi all, Any one could please help me with , ------edited by DDT. First post wanted items-------. Kind Regards Raf

hi there! was wondering if this jack would be suitable for an xvs650? http://www.ebay.co.uk/itm/New-Motorcycle-Motor-Bike-Quad-Lift-ATV-Jack-1500lb-Max-/130533436180?pt=UK_Lifting_Moving_Equipment&hash=item1e64662b14#rpdId thanks for any help jon

i want to know is there another engine i can use in this frame as i cannot find a yamaha dragstar xvs 125 or 250 engine can anyone help thanks look forward to hearing from any of you bike lovers

Hi everyone! Roj of Philippines here. does anyone here know the history of Yamaha DT 125 O1w (only 1 in the world)? Got my Yamaha DT125 bike 5 years ago and i am not aware bout the model of it until one of my friend told me that it is a Yamaha DT125 O1w model which he told me that it is only made or manufactured for Philippines only and modified by someone who happens to be the exclusive distributor (NORKIS) of Yamaha Motorcycles in the Philippines. Can anyone give any light on this matter?

I have a full DEP system but the front pipe has rusted too bad and now has a big hole. So im looking to get a new front pipe but the one i got did not fit. Any suggestions. This is the pipe i got http://www.wemoto.com/bikes/yamaha/dt_125_re/05/picture/downpipes/

Hi guys and gals. I'm new to the forum hope alls well in the land of yam. I'm rebuilding a 1977 DT100 and would love to hear advice from anyone on parts and tips. I'm rebuilding the crank at the mo but struggling to find a big end bearing. Also what's the best way of getting verious shims for the engine love to hear from you guys

Hi guys, any help would be appreciated! I have a 2003 (53) model and when I turn ignition on I get nothing Kick start and runs fine, no indicators until I throttle it. The back relay I think (white box by rear mid guard) buzzes like mad until I throttle or touch either brake. I installed a brand new battery, Turned ignition on and had 'N' come on ok, started fine. Then stalled when I put stand down And now nothing when I turn ignition on and same scenario of starts fine etc. any ideas? Cheers

i got a yamaha dt125r and i just found out that it was a 1992 not a 1998 i had to buy a wiring loom but could only get the 1999 wiring loom but now i have to connect this loom to the generator and cdi i need some help to find out what year cdi i need and did the 1992 dt125r have a servo motor (i thought that the 1992 dt125r did not come with a servo motor) i have an old 1992 cdi i have not tryed to connect this to the 1999 wiring loom. does anyone know if this would work and how does the servo motor connect to a 1999 wiring loom coz a 1997 onwards servo motor connects to the cdi .

Hi.Im looking For a yamaha dt175 mx complet air box the bike is a 1981 xreg mono shock .some one has told me that a dt125mx airbox is the same.please if you do have one .please let me know .thank you .david

Hi everybody I've just swapped my Yamaha Wrx 125 for a older legend lol DTRE 125 2006 3000 genuine miles only ridden at weekends and when dry so bikes pretty clean . Bike rides good although I have noticed a rattle from cylinder head possible little end bearing I've been told by local motorbike shop .. I was concerned it would damage the piston but my local bike shop says they all rattle and it's nothing to worry about ..? Can anyone advise if this is the case please . Regards karl

I know its a 5 speed but is it 1 down 4 up to shift?

I have found an old Yamaha F 5 from about 1968-69 any idea where or who might have spares or is it a case of find the nearest skip? any help at all

Hello from New York. I've returned to motorcycle ownership after 24 years. My first bike was a new black '79 SR500 (leftover in 1980) for about The '79 U.S. version, (like the '78) had front & rear disc brakes, cast aluminum wheels, and gold pinstripping on the tank. I bought a Ruby Red '80 SR500 used a couple of years later (missed the '79 after selling it). The '80 U.S. version had front disc/rear drum brakes. I kept it for 10 years...sold it in 1990 with 9k miles for a mere $600.. I always toyed with going for an XS 650 or Maxim 650 and did buy a '75 XS 650 a few years ago, but it can't match the SR.. I love the SR's handling, the sound of the big single and its t…

hello ! i am new here i have yamaha yd 100 & i decide to change the color please tell me code of blue black

Hi Does anyone know if yamaha ever made a folding push bike? Six speed?

Wanted A Yamaha FZ1 S Fraser rear pillion seat, 2007 to currant time. Make contact [email protected]