Dual Sport, Offroad Bikes

Hello anyone interested, how would i make my TTR 250 go faster without stuffing it up.

hey guys i'm new and i'd like some info about my bike!! It's a 2003 Yamaha DT125R with fresco end pipe, it's top speed varys on the wind direction!! 70-77mph back wind in 6th gear or 65mph in 5th gear @10,000 rpm cos when i change to 6th the revs die!! above all it's a fun bike and i'm reluctant to sell it when i pass my test?!! Plus a friend of mine has a 84 or 86 Honda MTX125 Road conversion (honda orange+blue seat) and on acceleration my DTr is a fraction quicker(electronic power valve?) but on top speed the MTX125 eats me alive with only 5 gears!!! lol

Hi Guys New member. I am looking for a source of good used or new parts for the IT 125 the bike is an australian import and was registered in Oz back in 1983 Great Little Bike, but in need of TLC Thanks for your help Fossie

What other 21" front wheels will fit my 94' XT225 forks. It has single disk brake. I find for sale several YZ front wheels, but cannot find their hub width, or axle diameter. My hub is cracked. Thanks for any advise. Reffixer.

Looking for a DT200WR for enduro competitions. If you have, or know of any for sale can you let me know? Thanks Nick

Hi TTR600 owners. Anybody know where I can pick up a set of SuperMoto wheels for my TTR600, I have it fully kitted with knoblers @ the moment for green laneing etc, it rides ok on the roads but a little twitchy if I lay it down at the corners, so I thought if I could have a different set of wheels with Moto tyres on, then I could use them when on road rides. Any help guys & gals would be appreciated. Yam 4ever

Does anyone know if the side panels from a TT 350 will fit the XT ????? Thanks.

i am trying to derestrict my 2001 TDR125, been reading the post lower about a 2004 dtr and the green and black wire and wondering if its the same system as my bike has the ypvs servo and is showing the same symptems of the power tailing off at 8000 rpm. the green and black wire on my bike comes from the back of the speedo and goes into the wiring harness can anyone tell me how to derestrict this bike if it is at all possible, i understand i might be following the wrong path with the green/black wire but it was worth a look cheers darren

Help, is there a tenere owners club anywhere?

Well, to start out, I am not only new to this forum (this is my first post), I am new to owning a dirt bike. I bought my dirt bike from my cousin and it's in awesome condition - T-TR 125 One of the things that kind of creates a problem is that there is no muffler, so it is extremely loud. Since the muffler was ripped off, there is not a very clean cut, some of the metal is sharded out from the exhaust pipe. Anyways, my question is... what would be the best thing to do in this situation? Should i buy a muffler and try to wield it on myself, or maybe just go ahead and buy a whole new exhaust pipe with muffler? I'm going for a low cost - i actually have no ide…

i know these are very hard to find i couldnt find a second hand oneandhad 2 buy brand new which cost nearly £160 so hers a real bargain if anyone is lookingfor 1 http://cgi.ebay.co.uk/dt125r-servo-power-v...1QQcmdZViewItem

I am based in Zambia and have recently purchased a YZ450F second hand. I am interested in identifying the year of manufacture. I have the VIN and engine number. Can anyone suggest a site that will give me my year of manufacture and exploded parts diagrams for the bike if I input my VIN/engine number. cheers

Hi all,anyone know if a YZ 400/426/450 can be fitted with a lighting kit to make it road legal? i was thinking that the set up as fitted to the WRs may fit as the bikes are similar,i wonder if theres a basic wiring loom fitted with plugs to take lights front and rear and the lights are just not fitted on the YZs?

Hi, I need a new regulator/rectifier for my super tenere and have found a couple of possibilities but I'm not sure about the vatriation in numbers. I have three on my list 47x-a2 sh569a-12, 47x - a1 sh569-12 - 9.5.1 sh569a-12 - T2.0.1 are these variants all the same ? or if not which is the best one for my bike (1989 Super Tenere) Would be grateful for any help or any other suggestions

Help !! I have been given a non running 1993 XTZ660 3YF which I was told only needed a cdi unit, regulator/rectifier and a coil. After purchasing these items on e-bay, I realised there is a zenna diode in the place where the regulator/rectifier goes. There is no record of this diode in the Yamaha service manual. Is it just the case of taking this off and replacing it with the new regulator/rectifier or would the diode work with the new cdi unit

im wnating to get sum yz upsidedown folks for my dtr but i wanteed to know how the speedo drive conectedtothe wheel. whould this fit a yz 426 rim?

Hi there, Im new to this form and the bike. I'm looking for the carb setting specs and maybe tips on jetting. The bike runs pretty good but does not like quick throttle bursts and will miss and chug a bit. I had a TT600 and know there is a lot to setting the opening to the second carb, poss problem? Thanks

Can Electric start be added to my xt 350? and suggestions where to get parts... I'm in southwestern Ontario

putting a crank in a 1999 wr400f. would anyone have a diagram to assist putting the bottom end back together? THANKS

putting a crank in a 1999 wr400f. would anyone have a diagram to assist putting the bottom end back together? THANKS