Jump to content

Naked

MT-10SP, MT-10, MT-09SP, MT-09, MT-07, MT-03, FZ1S, FZ1N, TDM900, XT660, XJ6S, XJN6N, FZ6S, FZ6N, Scorpio

  1. Started by rixer,

    Some photos of my R6 Quality is poor as taken with nokia If you have an r6 with tail tidy please post up so i can view.

    • 0 replies
    • 1.2k views
  2. Started by steveg16,

    Today i was at the petrol station and saw a R6 with what appeared to be a red bull can around this part of the bike..... can anyone tell me what this part actually does and why the guy had it done? it looked a bit odd, just wondering if it was safe to do it?

    • 2 replies
    • 995 views
  3. Started by pnoidrummer,

    what year is this bike? http://www.motorsports-network.com/YAMAHA/201mc/r1b2.jpg and also, is there a hole in front of it still?? and on the new 06 07 08 models of the r6, are you able to remove that short stem exhaust and put a full length one on, like a yoshimura?

    • 5 replies
    • 2.1k views
  4. Started by torp,

    Hi Guys, if anyone has one of these standard shocks for sale please email me! Simon.

    • 0 replies
    • 876 views
  5. Started by Chris 46,

    Hi all, thinking of fitting a sat nav on my 07 R6 anybody done this??? can anybody recomend a decent unit??? cheers chris

    • 6 replies
    • 4.6k views
  6. Started by Muzz,

    I'm afraid i have a terrible affliction where i'm never satisfied with anything, however with my R6 rather than chop it in for the latest and greatest and take a hit on trade in/new price, i'm going to try a different route. Keep the bike and add some sensible mods. I've only been riding for 6 months, its a raven black '05 R6 on a 06 plate with 3000 miles and the bike is so much better than me, the power is more than enough. Next year i want to start doing track days and probably will only be riding on the road at weekends etc, what would some sensible modifications be, the bike is totally standard. I know the best mod is training for myself which i will be doing anyway, …

    • 4 replies
    • 1.7k views
  7. Started by Liam's Z,

    Hi Guys/ Girls, 1st Post so I'll start by saying hello I'm Liam from the Northwest! Picking up a 58 plate white/red R6 next week. Just need some help regarding service intervals. After the initial 600mile break in period, how many miles is it till the 1st service and thereafter??? Thanks in advance Liam

    • 2 replies
    • 5.5k views
  8. Started by Bitripple,

    Hi, Can anyone tell me how the bodywork of the R6 changed from the 99-2003 model to the 2004 model? Basically i have seen a guy selling a seat cowl that fits a 1999-2003 model and im trying to find out if it would also fit a 2004 model?? TIA Rich

    • 2 replies
    • 1.2k views
  9. Started by Covcat,

    Does an R6 shock fit a thundercat? I have brought on by mistake.

    • 0 replies
    • 1.2k views
  10. I'm sure it's a common topic, but I can't find any help through search. Is there a conversion kit to change the R6 headlight from being on one side to both? I keep reading about this highbimmin site that used to do it but it seems to be non existant now. Just tired of the constant, "hey one of your headlights is out"

    • 6 replies
    • 17.9k views
  11. Started by 09YZFR6,

    what up just recently joined the site, picked up a new 09 R6 and wanted to throw a slip on, on it what else do i need besides the pipe, i hear a powercommander but with the bike get ruined or can it still be ran without one??

    • 3 replies
    • 1.3k views
  12. Started by workers85,

    Hi, my 2000 R6 seems to be struggling when i accelerate hard its a little juddery and really underpower then as soon as the revs build up it smooths out and rides like it should, can still lift the front wheel as soon as the revs are high enough but at the lower end something aint right. It feels like its not getting fuel but this cant be the case as it is sweet when the revs are nice and high. Anyone have any ideas what i can check or what they think it might be?? Thanks guys Paul

    • 14 replies
    • 3k views
  13. Started by dan2008,

    Would you say it's worth fitting a steering damper to the new R6? This bike won't see a track day. Heard it's prone to shaking a bit. thanks

    • 9 replies
    • 13.9k views
  14. Started by herb-powers,

    Hello peeps, i have a totally standard 2000 R6 im looking to buy a tail tidy but with so many to chose from not sure which 1 . most only do a no, plate bracket but im looking for indicators as well has any one bought 1 or can reccomend 1 Many thanks for any help

  15. Hi all, I have a 2005 R6 (R46) Rossi rep. The bike was garaged over winter with the battery plugged into a conditioner. I started using it a few weeks ago however the battery (6 years old) did not hold a charge for very long, and if I didn't ride it for a few days it went flat. I disconnected the old battery and replaced it with a brand new one (Yuasa YT9B-BS) as recommended by my Yamaha dealer. The battery was charged for 24 hours. I went to use the bike this morning and the alarm deactivated as normal, the lights, dials etc would power up, I could hear the fuel pump priming and the bike turned over quickly. The only problem is that it wouldn't fire up! I tried …

    • 3 replies
    • 2.1k views
  16. Started by Brian L,

    Hi All, Hoping someone may be able to help with this. My 2 month old R6 is starting to make a very painful noise. When I am pushing it the back wheel makes a loud squeeking noise as if the brakes are on. I think it only does it on certain parts of the tyre as when you are walking it the sound comes and goes. Not really sure where to start on this as I am quite new to biking so dont really have much mechanical knowledge. Any help would be appreciated!!

    • 2 replies
    • 1.1k views
  17. Started by chrisw,

    Hi Guys Got a quick question on tyres for the 2004 R6, as Standard they come with D208 (special fittment), and recently I had to have some new ones fitted after a puncture, but the Yam Dealer hadn't got any 208's in, but said a set of Bridgestones 010's would be ok, However I've had them on the bike now and just can't get use to them. At slow speeds through corners they feel like they want to tuck under the bike and jack knife on me, and at higher speeds in corners they just don't want to turn quickly at all, and a lot of effort has to be used to get the things to countersteer. Naturally this is getting on my nerves and is making riding the bike very un-nerving, and…

    • 15 replies
    • 6.6k views
  18. Started by pompeylee,

    can anyone tell me the correct manufactor front tyre size for a 1999 yamaha r6 as one person told me its a 120/60/17 and another said its 120/70/17 many thanks.

    • 6 replies
    • 2.5k views
  19. Started by njl555,

    Hi All Newbie here, Any other R6 riders out there? What tyre are you running on the back 180/55/17, Need a replacement currently have a Dunlop qualifier RR. Do i fit the same or go for a qualifier,qualifier 2, will be road riding not in the wet dry days only and no track days. Cheers

    • 2 replies
    • 1.4k views
  20. Started by dudman,

    hi all, looking for a new set of tyres for my 2008 r6 and im after some recomendations. the bike came with dunlop qualifiers which were pants( they took ages to warm up )ive just finished off a pair of qualifiers rr which were brill until they hit about 3mm depth then they eat themselfs within 300 miles!! so i'll be looking for a pair for fast road use and track days. thanks john

    • 5 replies
    • 3k views