Naked

Hi Guys, I have a R125 on a 2008 plate, which has covered little over 3000 miles. Does anyone know when the service is due? it did have its original one i think at 600miles. Also how often shouldl the chain be lubricated? Thanks in advance. Sam

Hey, I need to attach a phone case on my bike, as I need the satnav and, well I want to. However there is no room AT ALL on the handle bars for anything... Does anyone have any suggestions? I have purchased this, but the clip is too large! http://www.ebay.co.uk/itm/Mobile-WaterProof-Bicycle-MotorBike-Bike-Handle-Bar-Case-Holder-For-Cell-Phones-/322011016701?var=&hash=item4af95a2dfd:m:mmtv_UD9lFwZ8sJE9hjGs3g

guys i found this on youtube. have you seen this 150kit on r125? this must be good for our bike!

Hi everyone, A couple of weeks ago I tested a R6, and had the bike for an hour. I went threw Bristol and up the motorway, on to the ring road and threw the outskirts to get every sort of road avalible. I thouroughly enjoyed the ride. The only niggle I had was that there wasn`t a fuel gauge only a warning light, but thats not a great problem. So today I have been out tyre kicking today. There was something in the back of my mind saying "test something else just to make sure you don`t make a mistake of ordering a bike that is not best suited in the class for me, taking in comfort and usability and everything else." You can`t really buy a bike becuse it`s the …

Hi all, Im new around here, but thought i would join up and say hi! I have just bought an 05 R46, that my friend has owned since new..and i love it. The bike has just gone into my local Yamaha dealer for a full service, and they mentioned that it should have a rear seat cowl with it, with Rossi's signature on it..Is this correct? If anyone can shed any light on this, that would be great... Here's my new toy:)

Hi I wonder if anyone can help. I have just bought an 03 R6 without doing my homework and now realised I should have 3 keys. Unfortunately I have only one black one. Is it possible to clone these keys as there is a guy on e-bay who claims that he can supply a red and a black key for £ 120 or a cloned black key for £ 50. He does need either the key reader (moric) or a black key. This is a bit worrying as he is in Poland. I am assuming if he can 'clone' the keys there should be someone in the uk. Does anyone know if this is possible???

Everybody tells me that it's harder to drive a R6 than a FZ6, but I don't know why. I've never driven a FZ6 altho, because it's heavier I can only imagine that it's alot harder to tug around corners, it's very long and biggish so it's harder to manage, it has a up-right position which makes you less focused. Why would a nimbler lighter bike be more difficult than a big heavy touring limo-bike ?

anybody on here have one? i recently bought one second hand, when i came to fit it i noticied it was not the best of fits nor the best of colour matches, just wonderingn if anybody else has come accross the same problem? regards, mark

Think im goin to do a Rossi Fiat yamaha replica. In the last 3 months i've done a Relentless Suzuki, Rizla Suzuki, Various other makes of bikes, it's time to do myslf one......Does any one have R6 fairings and tank for sale doesn;t matter if they are damaged i can repair them... Thank you

Need some advise. I want to change the rear caliper on my R6 - does anyone know who makes a Straight OEM replacement. have tried the usual suspects but not having much luck, I want to use the Original master cylinder, lines etc any input greatly appreciated , Ta

Hi, Just joined the forum so big hello to you all! I've recently bought myself a 2001 R6 & needed some advice about steering dampers. Do they have to be a particular length etc etc.. I know you need a specific mounting kit but have seen so many out there varying in price & any help would be much appreciated. cheers Vic

hi i just bought a 2001 r6 with 12000 miles on it i rode it 1000miles and the oil light has come on twice anyone know why this is

HI CAN ANYONE TELL ME IF A 2006/7 AKRAPOVIC SLIP ON MEGAPHONE EXHAUST WILL FIT A 2008 MODEL

Hi.... hope everyone is ok... could anyone help me with the Yamaha Paint code for the metallic blue used on the 2008 (with gold wheels) R6?... I want to get my Arai painted the same colours as my bike but I haven't had the time to dig out and search for code numbers, any one help? many thanks!!!

Howdee Can one of you kind souls please tell me if the aftermarket pre-painted and drilled kits available on ebay from the far east are any good? Any advice would be greatly appreciated!!! F.

the new 07' r6 and r6s, which bike is more peaky? and what does the r6s redline at? and a quick question, is there a way to put an exhaust that's as long as the r6s on an r6?

went to dealers couple of months ago to buy a tourer but fell in love with a r46 rossi limited edition and spur of the moment thing took hold and now its in my garage but want to raise the bars for more comfort but where do i start? only company i can find is genmar but they say they don't do a kit for a 2005 model, anyone any other suggestions?

Hi, im pretty certain my cam chain tensioner is causing a chain rattle on my 1999 R6. The thing im wondering is whether to use a standard part or if the APE is a good upgrade. Ive also read and 03> tensioner is a better replacement part!? Also, whats the best way to adjust the APE to the correct setting? Heres a link to the APE: http://www.bigccracing.com/shop/product.as...mp;source=thumb Haven't yet got a price for a standard one. Any opinions or experience welcome!

I AM RACING MICROSPRINT AND NEED TO ALTER STOCK CDI BOX ON A R6. IS THERE A INTERFACE TO THIS SO I CAN DOWNLOAD MY OWN MAPS SINCE WE RUN ALCOHOL FUEL? ALSO WHO MAKES THESE CDI BOXES

I have the 08 r6 and has a oring chain. Anyone knows what is the best lube for this type of chain. I have Profi Dri lube presently?? Also want to know if flush indcator mods are legal - just in cast I get stopped one day with them??