The Bar

Hi guys, so got my first bike on the road and after some subtle mods and some new parts, shes looking mint, i've decided after 2000miles and not knowing its past that its time to change the chain and sprocket set i was wondered if changing the front sprocket from a 14 tooth to a 17 tooth would make any difference at all? Thanks for your help! Ollie................ DO not worry! just read an interesting post about 125 sprocket changing, which has lead me to think, get it, its only a 5er but keep the old one in case this ruins my gearing and possibly top gear pulling power..... Thanks.

I removed the rear wheel to replace the tire. After reinstalling the wheel the clutch will not disengage. When i pull on the lever, every thing moves back an fourth. It did seem looser then before the tire change. I tighten the slack nuts on the lever but still no change. With engine off, I can put it in gear and back to neutral with the foot clutch petal. when the engine is on, it catches an stalls out when i put it in first gear. It has a drive shaft. Could i have hit some thing or not put it back together right? Im stumped, i thought they were two different things.

I have a xs250 and it is bit different to the other modes that i have seen it has a disc rear end and it chrome guage buckets it a 1980 model and information would be appriciated

Hi there ! Im currently driving a yamaha ybr 125 (fuel injected modle) ive put a new exhaust on it and air filter but as expected ive got a few flat spots in the acceleration so im looking at getting this Chip to help me out. im not expecting it to fly me to the moon or shoot like a rocket but im just looking on getting the flat spots sorted and also for the acceleration to be a bit more sharp and for me not to end up going backwards when i get a gust of wind heres the item im thinking about http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=280568486369&ssPageName=STRK:MEWAX:IT like i said i was just wondering if it would be any good a…

i am looking to adjust my rear brake it seems to be a cable but i cant seem to find how i adjust it any help appreciated thanks

hey, I need fairing screws... the small ones. What size are they and where can I find them (not at dealer rip-off prices, please)

Hi I have recently been lucky enough to find and buy a brand new xt500 sp in the crate, its a 1988 model the last made , anyone have any tips or advice on what i should do to assemble it , i know the engine is dry stored so it will need oil but should all the settings plugs points valves be factory set? has anyone any experience of pdi for this model or any other new in the crate model? Thanks

Hi, how mutch fuel does realy a Yamaha Virago 125 ( org ) 2002mod. use on the mile ?? Wery gratefull for answers ! Steffen.

HI am looking for a tzr125r in any condition prefer 4hw model but will take anything so anyone who has one not for stupid money please give me a shout cheers sid

Just thinking aloud here but i remember when these motors first appeared in 125's and the valve was pegged with carb restrictions and a bloody great washer in the pipe to give 12hp. An hours work and you were on a 20hp rocket. The new engines don't seem nearly so much fun, like the latest stuff has its powervalves operate and they just don't go. The pipe restriction is a little bit. I recon the barrel and PV have been toned down. Opinions?

I want to know if i can put a Digital speed o meter on a yamaha YBR 125

hi folks ok a bit more from you lot hi i have a yzf 750 that has a johnson end can on it and have spent time looking for information on it but cant find anything so wonder if any one out there can assist on any information PLEASE many thanks in advance

can anyone recommend a place where i can get a lower fairing for my 92 seca II?

Hey all, I'm doing a 40 day road trip on a 1977 XS750. I'm posting about my adventures on my blog at www.OntarioRoadTrip.ca if anyone is interested. Thanks, Mike

hi,ive just had a new pc so all my passwords and usernames have being lost for some reason so ive made a new log in, ok then on m yammi dt125r ive being having probs with the clutch firstly when i start my engine and put in gear on low revs i can here the engine die slightly and occasionaly it will stall but once the engine is warm i have no probs putting in gear on tick over i was wondering if it needed a new cluch or something wrong with the oil thx

Hi, got prob. with my mio sporty. Push start doesn't work. It only has alarm, HID (3k), and compact horn. I already changed my battery... but still it does'nt work...

HI Could someone help i would like to put a 4 into 1 system on my bike has any one got any info that could help i would like something a bit louder iv seen a racing system from marving but i wonder if it would be a bit too loud thanks for the help

hi guys, ive just bought my first real bike a 1997 xj 600n and im attempting to make it into a masterpiece. ive just got a few questions that id like to put forward to all you guys. first does anyone know if a similar year fazer rear wheel will fit on an xj? second will most mono-shocks from the same year fit the xj im trying to jack it up abit at the back? third is there a 4-4 downpipe or one that lifts the exhaust up as they are low as standard? i have some pics of the bike when i got it but i need to upload them. the previous owner had dropped it a few times and the exhaust was snapped at the 2-1 on the left section. i have latter noticed that the clutch pedal…

http://cgi.ebay.co.uk/Yamaha-XS250-Cafe-Racer-/130534286314?_trksid=p4340.m8&_trkparms=algo%3DMW%26its%3DC%26itu%3DUCC%26otn%3D6%26ps%3D63%26clkid%3D849070366853772982

Help .... I have just bought a 1998 R1 and the clutch action feels like it is set in concrete. So far I have removed the clutch cable, which is free to move, as is the clutch lever. I have also had the clutch cover off and the clutch arm moves freely, no notchiness from the bearings. The previous owner tells me he had a new clutch fitted. Any one have any ideas Cheers Steve