The Bar

Hello all I am looking for all the help i can get I am looking for a list or knowledge of what part are interchangeable for my 1985 XJ750 Maxim X my bike is in great shape but cant find anything in Canada for my bike i keep getting good luck that does not help So any help would be great

Does anyone have any knowledge on the sports screens you can get off the yamaha website for the 125 range of bikes??

HI CAN ANYONE SURJEST WHERE I MIGHT BE ABLE TO OPTAIN F/R WHEEEELRIMS FOR MY 1977 DT400 B THANKS?

hi all ,this is my 1st postand my question may have been asked b4,but here goes.Ive bought a tdm850 4tx,the bike had been neglected and needed a new tank and a few other bits and bobs.My question is there seems to be a pipe that comes off between the two carbs and doesnt go anywhere ,i thought it mite be a fuel line,but on the tap the pipe is bigger and seems to go to the pump.Is it a vacum?there is also a long pipe with what looks like a filter in the middle of it .where does this go.there is a off take on the air box and also one under the tank?.Any help wld be grt.

hi everyone having some problems with my bike and was wondering if anyone had any idea what i could be. i went to my local bike meet in pool dorset on tuesday and the bike seemed fine on the way up maybe a little slugish at times but made it there ok then on the way home it was fine until i went 2 stop at some traffic lights i went through the gears as normal but when i was stopping the bike didnt seem 2 want to slow down so i put it in neutral and the revs where at 4 and a half k its never done this before and was wondering if anyone had any ideas what it might be. i used the bike today for about an hour and it seemed fine no fast ideling any help would be appreciated t…

hi all dose anyone know if yzf r250 a4 is real or not

hi folks the front forks of my fazer are all pitted is there any way to clean them up? it is not the shock bit but the laquered bottom bit,ie the thick bit of the shocks. the neglect was not caused by me but the person who owned it before. i am doing this as a project/learning about bikes while i sit my das course and hopefully it will be fit and ready to go as soon as i pass. cheers for all your help and advice friedegg

Hi Guys, is it possible to adjust the cam chain on a XT350? Minds rattling a bit when rolling off the throttle.

Hi all im a new member looking for some advise. Ive been looking at my mates rd500 which has a week spark on the bottom cylinders . She runs only on the top 2 i have swapped the coils around they both seem fine . can anybody shed any light were to go next . ive also tested the wiring between the charging coils and the cdi unit which apears fine ??? help

Ignore - not enough traffic on this site. Thanks

Hi need some help and advise. Ive got a dt lc 125 lc tenere and i cant find any information on it ive got the year it was made 88-89 im sure its an lc mark 3 drum on the back and disk on the front.Its got the old lc engine with power valve head can any one give me more information on it Regards Andy

I own a 2008 Yamaha Raider.I recently replaced my speedo face with a custom one. It looks great, but I screwed up somewhere along the way and my fuel guage doesn't work right. Does anyone know how I could fix this. I filled the tank up, set the needle on full, then turned the key on,,,,,showed a quarter tank. So I set the needle to E,,,, turned the key on,,,, quarter tank. Any help would be awesome.

I need help with finding a new crank for my tzr125 r new or second hand!! its the last bit i need now to put every think back together. any recommation of places i can look nothing on ebay thanks mark

Hi All, the WET battery on my 1995 Virago xv1100 has given up the ghost. Has anyone used or is using a GEL battery on the same age bike as mine? Does any body know if a GEL battery is suitable for my age bike (something about the charging rate). Regards Tony.

Hey guys. I have a small problem with my helmet's visor. My wee brother in law decided it'd be a good idea to play with my helmet and place it visor down into our lawn that's covered in rocks and stones. Needless to say, the visor is now scratched beyond all hope of repair. I've tried polishing and using the special wax stuff. No joy Now has come the time where I'm scouring the internet for a replacement visor, only to find nothing at all in the way of them. Do you guys know if the GMAC Jaguar is exactly the same as another helmet with a different name, or if there are any replacement visors out there? I don't really want to spend money on a new helmet…

hello all, anyone of you having kuryakin scythe mirrors on their bike? Can you share your experience? Also, where to buy/order? i'm a bit reluctant to mail order in the states, bad experience before. (i'm in belgium) thanks Peter

Hi folks first time poster,Can anyone help,i renewed brakepads on rear the other day,had to take off caliper as pistons were seized up,after lots of spray oil and a large clawlike grabber i managed to get the pistons back. i replaced the caliper and now the pedal wont firm up when bleeding the system, am i missing something here???

hello folks i have just joined the site and was wondering if any of you good chaps could help ??? ok my stepson recently bought a very very good thundercat on a P plate...he was coming home 2 days ago and he said that he had no clutch and the lever was very loose and no pressure, when i got home i took the clutch cable casing off as i suspected his cable was snapped however it is fine not snapped and still attatched to return spring...thats as far as we got and are now stumped as to problem and would appreciate any help or advise.. many thanks Jim

Paddy and his missus on the bed She's got crotchless nickers on, She says to Paddy "lick this ya big- sexy bastard"!, he says "feck- off"! "look what its done to your nickers"!

I have a 96 xv535 that's leaking at the clutch shaft seal where it enters the case behind the rear cylinder. Local yamaha shop said they have never seen one leak there before. I've checked the crankcase breather and it's clear. Does anyone know what caused the leak and do I have to pull rear cylinder to change the seal. Also I noticed that the aftermarket clutch kits note that kits are not for full synthetic oil. I've been running amsoil for the last 20,000 miles. Bike has 25,000 miles.