The Bar

Can I replace with a 450 engine....any ideas

Was running EBC HH pads in standard R1 5VY calipers gripping standard discs, which were a slight improvement over the OE pads. THEN a Friend got me to try some TRW LUCAS (German spec) front pads, and once bedded, THEY REALLY MAKE A DIFFERENCE!! Any of you out there want some grippy stuff, then I suggest you try these, you will be ammased at how good they are. (not tried the back ones, Coz standard pads will lock it anyway) They retail for about £23 a caliper, so not too expensive either. (not tried the back ones, Coz standard pads will lock it anyway)

TRX 850 Exhausts Wanted Anybody got any??? Out will do

Dear all, I have a 1999 YZF R6. I was wondering please, would a 2002 YZF R6 rear pillion seat be compatible with my bike please? Thanks all! nic

I have the old laquer-shellac ? coating removed from the engine and buffed it up. I looked back in the forums trying to find the posts on what some of you prefer as a polish on the engine after it is nice and shiny. Couldn't find them. Appreciate your help.. Thanks..

HI MY BIKE IS DEAD VERY WEAK SPARK I HAVE CHECKED THE COILS AND THE PICK UP COILS ALL SEEM TO BE OK DOES ANYONE KNOW WHERE I CAN GET A CDI / TCI UNIT I ALSO FITTED A NEW BATTERY . THANK YOU FOR YOUR TIME

I have a project 1987 (D) FZR400 that I would like to put modern rubber on. Anyone Know which 17"" rear wheel will fit, either straight in or with the minimum of fuss. Failing that whats the stickiest 18" rubber I can get?

My son recently crashed his pw 50... he's ok just had a bruise, however he snapped his on off switch, I went to see my local yamaha dealer to order a new one, it had to be back ordered... they can't give me a solid answer of when it will be in, I want him to be riding now, anyone have any ideas of how i can make this thing work I would greatly appreciate the advise, thanks!

GOODAY ALL! I have just aquired a fizzy, i have stripped her down to start the rebuild, what i would like to know if someone could help me identify the year model All of the fs1,s that i have seen, the exhaust is at the bottom, my one the exhaust comes up the top of the frame, i suspect it might be a 1972 model. would any of you kind folks have a manual for the bike on a pdf file? Have a nice day regards BIOMAN

Hey, so I'm consulting with the Yamaha experts here, right? I've got NO experience in evaluating what a street bike is worth, or even knowing what it is that I've got. We do own 3 pretty cool matching Yamaha dirt bikes, so I feel I've got a right to be in this forum- I've just never had a need to post anything. So here's my dilema- I won this auction for an abandoned storage unit and in it (among many many other things) were two Yamaha motorcycles. One was a dirtbike with no engine, the other was this BEAUTIFUL street bike that looks 98% restored with not a speck of rust on it. We have no place to store it inside- so I'm thinking to either finish it off and sell it o…

I saw this...some people maybe at risk.... Link to news DNS server check..click here

I recently bought a 1965 yamaha ,it has a chrome gas tank the fenders are grey it is bone stock, its for on the road or off, the #s on the frame match all the other #s which read on the case G1-803786 and on the the front forks the #s are 803786 The speedo milage reads 3161.9 the bike had 1 owner who bought it brand new in 65 and she registerd the bike and road it untill 1983, Im not sure what it is either a rotory jet 80 or a YG-1, it looks more like the YG-1 . could anyone tell me what it is i have???I am getting the tank cleaned out and I need a front tire ,and a battery, can' wait to ride this little bike, thanks

JUST TO SAY HI TO EVERYONE, I AM A NEW MEMBER AND LOOKING FORWARD TO GETTING INFORMATION ABOUT THIS KIND OF BIKE SO I CAN GET HER BACK ON THE ROAD, DOES ANYONE HAPPEN TO HAVE OR KNOW WHERE I CAN OBTAIN A MANUAL FOR THIS BIKE ESPECIALLY THE ELECTRICS SIDE. THX JB

hi does anyone know the best airfilter for a yamaha dtr 1998 and wer to get it from? thanks

the engine is now beeing sorted at a cost of aprox 300 pounds! (ouch), that means now the bike ows me more than its worth! that is always nice to know!!, on the upside... i know it will be done and pretty much as new!!, hopefully!, so i have concluded i know pretyy much nothin about bikes or i wouldnt have brought a knacker and that EBAY is odviously not for me either.................

Hi please can anyone help on this how can i test my starter motor on the bike as i cant seem to get her to turn over. i have a brand new battery on her but nothing completely dead. many thanks John.

I am looking at Memhis Shdes and National Cycle products. I am 5'7" and would like imput on both styles and height. Any help appreciated. Don

hello everyone just returned to biking after a year off after a spill in france on my daytona 955i se bought a wr400f to do a bit of offroad and green laning went for my 1st off-roading day sunday with some local lads and i was shattered they really went for it but i really enjoyed it , bike was great , only downside was the kickstart which starts everytime but when you are knackered in a pool of mud not so easy.

Hi Newbie here Can anyone tell me where the local meets are held? based in Worthing but don't mind travelling. Looking for some like minded people to meet up with on regular basis. Dave

HI can anyone please tell what the 2 stroke mix is for a DTR125 engine Thanks David