The Bar

Hi all,can anybody tell me if you are allowed to overhang the bay at the front and or the back as I think you can only park adjacent (90 degrees) to the kirb and not at an angle, there are bays near my work where only a Vespa can fit and my DT looks longer please let us know

Im having trouble figuring out the chain guide on my mx400, it just doesnt look right, its at an angle with loads of sideways movement.....does anyone have a pic of how it should look? Its a white roller on a bracket... Cheers Mark

Just a question to see how many kicks it takes, how long it takes to warm up and how does it ride. Do you guys like your DT?

2000 model XVS 650 Dragstar Custom Fuel pump doesn't prime when ignition on but bypassing it to battery makes it pump. Relay? Regards Austen

And were are they made ??

Slowly getting the 83 XJ900 together, fuel tank repaired, painted and side covers painted with new petcock on the tank. What I need help with is when I got the bike nothing was hooked up. I need to know the routing of the fuel & vacuum lines. I have a CD manual but doesn't show me anything. Does someone have a diagram that would help me. Once thats done air filter and battery and we'll see what happens . Thanks

yes all brand new action staring the grouch episode 1 Not again ffs & wtf is wrong with my mountain bike now, tune in to hear all about grouch's woe's and mishaps! this week grouch looses a brake block, how the f#%k did that happen, he took it to the bike shop, it cost £154 WTF!! and it's still not right I'm such a Knob

hi does anyone know the year range of cdi unit I can buy for my 1999 dt 125r thanks

Hi all, I'm currently in the middle of some cosmetic mods for my fz6, I'm looking at changing the indicators to some nicer looking ones and have come across LED indicators on eBay, are these road legal in the UK? Will they pass an MOT?

Where has the workshop forum buggered off to?

http://www.youtube.com/watch?v=ASO_zypdnsQ

Basically my speedo doesn't work , the chip inside is burnt, I bought another one which has a different plug socket and wondered if there is an adapter which could plug in between the different sockets to connect them?

Decided lately that I wanted some short levers for my FZ6, the stock ones looked a bit dull! But I didnt want to spend £80 per lever on ASV ones so I thought I would try some cheap levers from eBay. My first worry about them were that they may fail in operation, but having checked many many forum reviews and despite all the worry stories, I didnt find a case where cheap levers have failed under normal use.. So I bit the bullet and I bought these, short, black version: http://www.ebay.co.uk/itm/350648816847 Despite having to wait 4 weeks for them they have finally arrived and I have fitted them onto the bike. First thing I did was inspected the lever build, quality…

i got this its of a dt something,it has stanley on it it was spayed silver and i painted it black(not very good) has a long crack in the top of leans its free to someone if thay want it .no good to me.

Fuel exhaust have just made me a road legal end can to fit 2002 XT600e, to fit onto a laser Pro Doro system. The difference this has made to the to the performance of the bike is unbelievable pulls much cleaner appears to have more power and no longer feels like the engine is being strangled oh and it sounds like a 600 single should nice bark to it but not to loud. This is the second one off can Fuel have made for me all they need is the size of the inlet you require and they will make it to suit. Excellent service.

Hi everyone i need a new rear tyre for my dt 125 re 2005 could anyone reccomend a good place to buy one from and also a good make ? many thanks

Hi all! Are there warning signs when the oil pump fails on my bike, and if so, what are they? Thanks in anticipation I.L.

well i only have to wait till friday! but i have purchased a 2010 FZ6, S2! chuffed to bits - has givi topbox and rack, twin leovince evo 2 cans, included are the origs, heated grips and a few other bits and bobs. all mine for a smidgen under 4k. so happy to be back onto a yammy, and hopefully (touchwood!) this baby shouldt let me down. honestly couldnt be happier! more pics to come when i get her GLAD TO BE BACK GUYS! Matt

Hi, I just bought some Chinese heated grips and I need some help to fit them. First, how could I remove the old grips? Second, where it would be ideal to connect the power wire? Cheers,

hi, does anyone know which exhaust system will fit my xj750 maxim, its a 1982 year imported from usa the collector box is rotten and im not keen on a 4 into 1 thanks kenny