Airhead

Try here rob http://www.yamahamotorcyclespares.co.uk/spares/partImage.asp?GPN=styfc34&uid=94489503

Cheng Shin do 250 x 18 http://www.vintagetyres.com/item/638/250-18--cheng-shin-road-tyre---c113-universal

yeah good point dT175F is 2N5 prefix however the DT175F has the same electrics as yours...hey ho have a look here, you can clearly see the switch item#3 in the handle fiche, to me that makes yours a 175F, i really cant imagine someone changed the loom and switch at any point http://www.cmsnl.com...8692/partslist/ http://www.cmsnl.com...8652/partslist/

:eusa_whistle:

Greetings PJ, great picture, you're a track day fan then eh

i would stick with 3rm 20 if that was what's on the bike, one of the others may be restricted perhaps? just a guess!

yes you need a cdi? I thought we'd established that much

yeah the wiring diagram is in the Haynes book, the one with the brown cover you said you were going to get? and.......... your bike is the DT175F (Not E) The E does have the lights switchable F model has no light switch so I assume the lights are always on Haynes ISBN 1 85010 300 3 Have you tried this American forum, but of course our is better http://www.thumpertalk.com/forum/47-vintage/

so Richard, what switches are on your lefthand switch unit? my bike (granted..a uk model) position 3* with the ignition switch brings on the tail and front pilot lamp even with the lights set to OFF on the handlebar unit, in fact the handlebar unit only controls the headlamp bulb, so set it to ON with key at position 3 for the headlamp to work *...Position 1 being OFF

Greetings and copy and paste into the 'classic' forum and keep this for your intro thanks

if you wear your boots outside in very wet weather, you feet will get wetter because the water can run inside them

you can check the DVLA site to see if its still registered but they wont pass on current owner details

Greetings Steve from another 58 vintage

Great, thanks for the update

Yes somewhere near the battery

check the fuse and the battery connections matt

take it off and tip it out, it wont be doing you crank bearings any good!

that crossed my mind too NEO

not got a part manual for that one!

thats why i asked about the base gasket try the push start with choke and a new plug

try a new sparkplug and gather a few mates round for a push start. after a winter layoff i couldnt start mine for love nor money, changed the plug and away she went. Then fitted the original plug back in and no problem whatsoever!!!...weird

cammy did you replace the cylinder base gasket when you took the cylinder off, are you sure you didnt leave any broken gasket from the old one behind? Greetings and

Greetings Tommy, nice intro

wow a junkyard!!! that wouldnt happen here in uk are these now or before? notable differences are the front fender, silencer and amber reflectors on the headlamp bracket have you got a parts list?

Them yuniparts lamps look pretty good to me and i like the grille they have re-produced, never seen one 'in the flesh' though, will they accept a 12v bulb? the bike is looking good,... if a little out of focus.