Jump to content

blackhat250

Free
 View Profile  See their activity

  • Posts

    8,343

  • Joined

  • Last visited

  • Days Won

    192

 Content Type 

Everything posted by blackhat250

  1. blackhat250
    Thats not the clutch side , thats the ignition rotor,
  2. blackhat250
    Welcome ike" ,, you"ve got the resto bug i see,,
  3. blackhat250

    Flooding

    blackhat250 replied to YamYamMan's topic in General

    Good you"v got sorted, the main jet has no bearing on low engine speed. only wide open throttle. pilot jet & air screw determine idle and first 1/4 of throttle opening,,
  4. blackhat250
    Ah , that be the silver 1G1 . then,,
  5. blackhat250
    Stick my hands on the cylnder heads to warm gloves, when its cold, [ thats most of the time up here]. then read the opisite lights, and time it for the take-off,
  6. blackhat250
    Welcome wade " must agree about the vital statistics, " i think this should be mandetory ,,,
  7. blackhat250
    Welcome mark, ,, fire tech questions in workshop, or search for them ,as most subjects have been covered,,
  8. blackhat250
    Hee " can"t hide anywhere nowadays,,, .. hand over back of carb was to increase vacume,,
  9. blackhat250
    Yeh ,,, the 1975 DT175/125 B model fits, but not the CT1-3 models, they are narrow underneath,, .why do you want to change,,
  10. blackhat250
    Yeh plates wil be stuck, put front wheel against wall, ,and with lever pulled in select gear,, if that dont work ,, strip needed, them air joints on carb look iffy, and stock air filtre would be better, to solve the running issues ,
  11. blackhat250
    Buy a multi meter, there cheap. chances its a bad earth, un bolt it ,clean it and remount it,
  12. blackhat250
    Aye dave " check that chain for seized links, ditch it, coz there about £20. for them dt"s . rust , man hasn"t found a cure for that yet, cure for cancer will be found first,
  13. blackhat250
    Welcome 96" as he says take out the pilot jet, clean it till all holes are clear, the carb bottom will have a well with small hole in bottom, this feeds the choke jet, blast it thru with carb clean, .air screw will be 1.5 turns out,
  14. blackhat250
    Welcome catto " yip seems like good enuff stuff, i"v dealt with jls, before , good seller,,,
  15. blackhat250
    Acording to Stan [ stephens] the man,, its not the earth strap [ tip] that the colour is , its the threaded area, and yours looks Blackish,, rich then,,, also he says W.O.throttle, but not full revs, if you know wot he means,,
  16. blackhat250
    Looks very nice "
  17. blackhat250

    Mug Shots

    blackhat250 replied to Noise's topic in Yamabyss

    Great pics " Seams to be a marital thing ongoing " so heres me [ white flower] with me bro" waiting on the bride, 20years ago . And 20years later. getting me wallet out, at the 2 stroke meet.
  18. blackhat250
    Yeh yer right, a fair selection of different engine configuration ,,, welcome too ,,
  19. blackhat250
    I think this has always clashed with our Squires meet, 1st weekend in september, as i always see them heading to Barnard castle,,,might be different this year tho..
  20. blackhat250
    Welcome gatens " good choise,,,
  21. blackhat250
    Yip " thats the bugger Dunton Basset. , pity i neve knew you Eddy, The bike section was poor, A rocket 3 . and a CB200. i mind seeing,,
  22. blackhat250
    Welcome jeroen " parts might be hard to find,,, the mods will help with that photo i hope...
  23. blackhat250
    He wants to get jeans that fit him,, yuk "
  24. blackhat250
    Welcome Ste " a bit more info would help with conversation, ,,
  25. blackhat250
    Weel its about 3 weeks away, am planning on being there friday, 5 pm ish, Scott SS50 will be with me, in van. or trailer,
×
×
  • Create New...