Snakebite68

Almost certainly NOT something you want to attempt, even if you're SURE that there's no real traction going on!!!

Not certain I'm going to be able to explain my idea properly, but here goes... A 2 piece spindle... Assuming one fork is threaded and the other isn't: First side slides in the threaded fork and has a thread to match up by the bolt end to engage with the threaded part of the fork. The other side of the spindle slips in as normal. The two parts thread together (don't think it will matter which is male and which is female). So, threaded side in first, tighten up, non threaded side next and screw together. The downside to this is that you will need to torque up BOTH sides separately (and how you'd work that out I don't know lol). P.S. I'm certainly NOT an engineer, and you'd DEFINATELY need an engineer to work out your torque settings. Although, getting a custom spindle made DOES give you the option to go for Titanium or Stainless Steel...

Sad times...

Intake Manifold Yamaha XT 125 R Enduro Type 3D6 - 1A Japan Quality - Induction | eBay Have you tried google?

Wierdly, it wouldn't be the first time I've had a passenger fall asleep against my back! The bonus with sports bikes is that unless they're restless sleepers, they just kinda stay there, against your back! lol

Yo! From Yorkshire... I'm sure there's others here from Gloucestershire...

Aaah, ok, I was wondering because depending on which way you do it, that bubbling out of the threads can cause you problems. Using the leaver or a pressure bleeder isn't bothered by it, but if you use a vacuum bleeder, there's a chance you can actually suck in some air at the end (been there, bit of a bugger!). A bit of thread tape cuts down the problem to the minimum...

No worries. Which way were you doing it?

The seams of mine are internally taped, however, I think I've found the problem, part of the tape is loose. What I need now is some rubber cement! I still want some better waterproofs though.

Do you have any particular examples / suggestions? There's something liberating in riding in the wet (so long as your knackers stay dry!)... Yes, you stay dry and warm and can have a peaceful fag in the car, but it's just not the same! Trust the rubber..!

So... It's raining... I've got rain wear, but it would appear that there's pinhole leaks in the trousers (probably from putting them on and taking them off) around the crotch somewhere. I'm going to put this down as being one of the problems of rubberised clothing. So, the question is: Does anyone make non rubberised wet wear? Gortex or just simply better quality maybe?

Have you tested it with a multi meter? Yes, it can have a hairline crack in it.

First off, change the primary fuse (it may be invisibly broken), no point going further till you've done that...

Congratulations!

No, not getting time to do it... Think I'm just going to drop it into Padgetts and have it done.

What colour are your spark plugs when you take them out? Pictures would be good...

Mmmmm... Thunderace..!

Pictures no worky..!

Putting a fuse in the neutral side won't technically protect against reversed polarity, but as the first item starts to cook, it will pop and protect everything else.

And this is why I usually install a fuse on the negative side too... But until we know what bike and model it is, we can't begin to figure out what it's done. If it was my Thunderace, it would just be a case of tracing the wiring and replacing whatever blew first. If it was my V-Strom, god knows what would have blown! We'll just have to wait and see if he ever comes back again! lol But I reckon this is going to be a 'shop job'...

Make? Model? Pictures? Does any of it (particularly the wiring loom) look modified? Was the 30amp fuse under the seat fried? If connected the wrong way, it shouldn't have been... The more information you give, the better your answers.

NOOOOOOOO! lol At least when you buy new mirrors, you've already got the custom looms!

16 years older than me, still no news on the health of the bike though!!!

Screw the foot, it will heal! How's the bike??? I went to go get a test ride of a Royal Enfield. The little car park outside of it was all full of potholes... While turning round at about 3mph I bumped a pothole and down I went with the Thunderace on top of me right in front of the plate windows of the shop. I was just laid in the street on my back laughing. I still went in to look at the Royal Enfields, but I didn't ask for a test ride...

Oh, they're definitely smooth.. I just can't identify all the little noises. I could have a big end going, and I wouldn't have a clue! lol