Paul brown

Taped a wire up that wasnt connected to anything and the bike has been fine all day mist have been cuttin engine out when touching it but have noticed that when you turn left indicators on it puts the hazards on ? Must be wires in switch will look at it when i get a new switch as this one wont come off

Lmfao ovs i dint just look at wiring. I checked all the connectors all wires are nice and firm in connectors managed to sort the indicators out in the process. But are blinking abit fast ? Might try changing ignition barrel as that might be knackered?

All looks fine mate dont know wat else to do with it

Sorted the oil out and i ment were u put spark plug into the head lol . The bike is still dying out. Changed the water oil pump seal changed gear oil changed coolant/water. Let bike tick over for five mins set of and it died took it back to a friends and 45 mins later and a spark plug change noticed it was not sparking with ignition on but did spark when ignition was off as a last effort to get the bike home i tryed kicking the bike while ignition was off and quickly turning ignition on the bike fired up straight away and i got 1 min further than the firtst time and died again i then managed to get the bike going 2 more times only by doin that with the ignition. And pushed it home. Abit confused myself tbh.

Hi people bought a dt125r 2002 just got it on the road yesterday. Went out on it today and the bike has cut out twice on me.the first time i took spark plug off and noticed it was wet and so was the top of the head, i left it for 5 min and put it spark plug back in and it kicked first time and happened again just as i got home. Also the right hand indicator side indicators on dont but show up on the dash as they are ? Any help would be much appreciated thank you