Ollie1995

Cheers for the reply, the engines been sat for a while so the rings seized to the barrel, the barrel looks to be fine with no scoring so I was just hoping to get a new piston.

Hi, I recently purchased a seized MK3 DT125 engine that required me to drill holes in the piston to extract it so it's no longer useable. I measured it and got 55.84mm but from what I've read this is actually 56mm (standard size). Are there any differences between mk3 models and the later model pistons? Thanks, Ollie.

So I've bought a load of loose bearings just to get the project going and I can make some rather more expensive investments when I move on a bit further. I'll let you know how they are when they come

That's great drewpy cheers, I'm just trying to get a rolling chassis before I start investing money into it, so these can easily be changed at a later date.

Thanks for the reply Preload, could anyone else confirm these are 6mm, they're only £3 for 100 but it'd save me some hassle

Hi, I'm part way through building an XS250 but I'm struggling to find cheap bearings. The cheapest bearings I have found are 1/3 the price i paid for the bike and they are taper roller bearings. However since it's a low budget project I'm trying to source some loose bearings but cant find them anywhere due to me not knowing what size the bearings are, so if anyone could let me know what size bearings I need that would be fantastic. Thanks, Ollie.

Yeah I wish they never put electric starts on them. Can't even test mine as the button's been removed.

runs

Yeah it sucks to be poor.

I couldn't either haha, It's a lot smaller than it seems! My plans are to keep her as original as possible, just clean up, get running and get it through an MOT. I'm currently spending a fair bit of time on my DT125LC so time is the issue. I've got the 30 year old battery on charge to see if it can be salvaged and keep the costs down, but I think a new one is in order. Ollie.

Hehe tassle too! I despise these bars too but thought they where originals. Also have you got any pictures of yours? They seem to be rocking horse shite for spares

Hi, I've already put this on BCF but thought it would be more interesting to you guys. I got this yesterday after an impulse bid secured me what I thought would be a big regret but after a bit of TLC it's come up pretty good and I don't regret it at all. It's only had 1 previous owner from the Isle of White and has been cared for pretty well by the looks of it. Everything is original and my aim is to keep it this way, keep the majority of the paint original and get it MOT'd in the near future. I bought it knowing it doesn't run but after having a quick look over it I think it's likely to be just a battery replacement job. I took the points and air filter covers off and they look spotless (probably not been opened since 1983), so I know it's not been messed about with. It came with a cool aftermarket topbox and still has the tax disc from when it was last on the road in '98. We didn't realise it would be as small as it was so where pleasantly surprised when it went in the back. Now the clean up: I think it was covered in something similar to ACF 50 as the wheels have come up great and the exhausts aren't to bad either. After a wash and wax

I hate them too, don't seem to give a shit about what they do and most of them are power mad. Plastic pigs are just as bad too.

I've contacted Sunrise graphics, just waiting to see what they will cost.

I've seen that and unfortunately they don't do it for my bike.