bordthewake

Hello my name is Brian and I was wondering if anyone knows how much fork fluid I have to put in outer chamber of the forks. I have already filled and bleed the inner chambers of each fork, replaced the seals, and now I have to fill the outers, but I am unsure on the quantity. I have a ratio rite so if anyone knows a cc measurement that would be great. I do not have a service or owners manual for it. Thanks in advance, Brian

Yeah started seriously third kick, ran for about a minute(45 to 60 seconds) and then I turned the choke off and it bogged down and died. That told me slow idle jet so I did a complete carb clean and still nothing. The woodriff key, underneath the staitor, is still there. So I do have compression and spark but I have been kicking it for about two days intermittently, and nothing. FLOODING! I think I will try to flood the bike because I have yet to smell gas when I am kicking it over, even after my carb clean. COULD THIS MEAN REEDS?!?

I replaced the cylinder the piston(rebuilt the top-end) and after putting it all together it started the 3rd kick. After I turned the choke off it bogged down and died, and now it won't start at all. I have done a full carburator cleaning and cleaned up the staitor because it was rusty and it does have compression(around 190psi). Still won't start .... any ideas?