Alex

Wonder what happened to my old YZF, sadly likely in a scrap heap somewhere now. Loved that bike, still one of the most fun bikes I've had.

Pure bike porn. New axle and nut at 100 lb-ft.

Buy some WD-40 Specialist Degreaser, it's citrus based so isn't an alkaline so won't damage the aluminium.

Hopefully it was just a near miss, everything ok?

I'd love to have a go with one, I can really see the benefit of commuting on one. I've been consiering changing my MT out for the last two years, have had enough of the whining triple noise. Sounds great when you're at high RPM around country twisties, but commuting to work my ears are crying. And yes I wear ear plugs. I'd love the quiet ride, BUT, I really feel the noise from motorbikes makes them safer. I still get people merge in to the side of me once a month, I'm on a loud bike, wear high-vis top, white helmet and try not to ride in blindspots and it still happens. I bet accident rates would skyrocket if everyone moved to electric bikes.

Hey all, it's finally happened! Yamaha recommends torquing the rear axle nut on the MT-09 to 108 lb-ft, which honestly seems pretty excessive. I’ve always stuck to 100 lb-ft using a proper calibrated torque wrench and I’ve still ended up with some thread wear on the axle and nut. I went to tighten the wheel and I had that horrid feeling of realising it turned to infinity. From what I’ve seen online over the years and now finally experienced myself, that high torque might be fine the first time with brand-new parts, but it’s not good if you’re adjusting your chain regularly. I think most of us are loosening and tightening the axle fairly often, and that kind of repetitive stress seems to slowly wear things down. I've learnt from this, as it's completely my own fault still, a 7 year old bike and I've never changed those parts. What I’m planning on doing now: Torquing to 95–100 lb-ft max, and that’s only if the threads are clean and in good shape. Swapping out the axle nut every once a year. If I use a bit of anti-seize, I will drop the torque a bit more maybe 90–95 lb-ft. So, when should you replace the Axle? I've researched this and can't find an actual recommendaion, I guess if the threads are still clean and not damaged, you can probably get years out of it, seems like 7 :) But if the nut doesn’t go on smoothly or you see any flattening, galling, or metal flecks… it’s probably time to bite the bullet and replace the axle. I’d now going to take it out and check it once a year. Curious to hear what others are doing with your bike, anyone using Loctite and going lower?

Subjective, but at least that one actually works.

Just seen this in my local news... luckily it's not near me. https://www.smh.com.au/national/nsw/is-this-sydney-s-worst-roundabout-drivers-perplexed-by-bizarre-new-intersection-20250627-p5mapt.html

Welcome aboard Gary

Hi @mr bignal sorry was away for a long weekend. Easter and Anzac weekends over here so took a few days off in between. Just responded to your PM with your membership number, let me know how you get on. Cheers

Oooh two stroke... the best motorcross. Welcome aboard!

Wow that's shocking, obv he doens't need new customers.

You're not daft at all, this is a super common issue when switching to LED indicators on a bike. The problem happens because your old bulbs used more power, and your bike’s flasher relay was designed for that. LEDs use way less power, so the relay isn’t getting the right load, which makes both sides blink at the same time. Some bikes also have a single dash indicator light for both sides, and with LEDs, power can bleed through and activate both. The easiest fix is to replace your flasher relay with an LED-compatible one. Just swap out the old relay for an LED-specific version, and it should work normally. If that doesn’t fix it, you might need to add load resistors to each indicator, which trick the system into thinking the old bulbs are still there. Resistors take more effort to install, so try the relay first. If your dash light still causes weirdness after that, there’s a simple diode mod that can help, but one step at a time!

Have you tried checking with the https://www.lcclub.co.uk/

Hi @NE0 thanks for pointing out. The issue here is that the pinned posts will always stay on top. However I'm pretty confident those pinned posts were unpinned a long time back. I'm guessing v5 may handle them differently. Will go through and unpin where neccessary.