.jpg.5c05eb7af257e741ca000bd984024429.jpg)
drewpy
-
Posts
15,173 -
Joined
-
Last visited
-
Days Won
295
Content Type
Profiles
Forums
Gallery
Events
Yamaha Racing News.
Media Demo
Store
Collections
Classifieds
Everything posted by drewpy
-
Feel the kick lever getting harder, this is when it is on compression. depress the compression lever so the piston goes over TDC. let go of compression lever and jump on the kick start. try different amounts of choke and twist grip when engine cold. No choke hot. could also be flooding the engine and creating a hydraulic lock with the fuel. ie over fuelling the bike
-
contact gaps (if fitted) ignition timing valves adjusting coil parameters check carb on that side all gap info is previously posted, use the search facility
-
already discussed in this forum. please do a search before posting Q's
-
some thing like this Item number: 170122928169 will fit, but i don't know about the jetting. Why don't you buy an eliminator and tell us if they work
-
oil low and frothing at higher revs?
-
I'd start with stock and run on a dyno to get the fuelling curve. then you can optimize the flow with new jets if need be.
-
same thing happened to mine, I got a friend to look at them and he pushed them through from the top. It enlarged the hole but you just screw in the pilot screw in more!
-
Wow those carbs were gunky!! Mine were no where near as bad and i still had a severe blockage in which you describe. Had to soak over night and use a fuse wire and jiggle till i got compressed air through the bowl. Then i sent off to JRS to have them cleaned. Looking at my manuals, the pilot system can't be fed direct from float chamber as it has a blanking plug over the jet so would seem to come off the starter system!! The fuel filter you have is the same as mine. I thought they had a paper element at the top part!!
-
Watch those balancer chains and tensioners, and keep the oil clean as the top end gets starved of oil easily
-
I just used a small inline paper filter. Just because they are ultrasonically cleaned, doeasn't mean all the crud is out. Some swear by using a carb additive in the petrol tank and that clears out the gunk
-
on my xs400 the timing marks are called RF for right LF for left. The LT/RT etc is for the valve timing. just a thought
-
http://www.cmsnl.com http://www.bikebandit.com http://www.yamahaspares.uk.com/index.html http://www.oldbikebarn.com http://www.nwvintagecycleparts.com/ http://www.hvccycle.com/ http://www.yambits.co.uk/ http://www.motoward.co.uk/ http://216.168.60.165/speedandsportinc/index.tpl http://www.cameron-site.co.uk/nrp/ http://www.sunrisegraphics.co.uk/
-
yep, pilot jets blocked ( a recurring theme in xs400 threads)
-
as from an xs400D, custom models have 16" rear wheels, high rise bars, different frames to accomodate a different seat. engines are the same maybe minor diferences in '80 with rubber mounted engine and oil sight glass.
-
either running very weak (check sparkplugs) or your ignition has somehow retarded. don't keep running it like that as you are getting partial seizures ( cutting out), does it run when cooled?
-
I get the same measurments on mine and you should have 34mm carbs which are the same as the 400 so your good to go. A rebuild cost; get a keyster kit from ebay (canadian company) and send the lot off to a ultrasonic cleaner who does carbs (150$ ish)
-
take measurements and I'll check my 400 ones
-
any 34mm carbs should fit except 2 stroke ones (i think they are designed different due to the 2 stroke oil, but don't quote me on this) need to put on a dyno afterwards to get the fueling curve right
-
Chris, do a search on the forum as there's loads of stuff here. pm me if you are still wanting!
-
the engine number indicates an xs650b '74 to 1975 but these had calipers behind the fork leg. The earlier 1972 XS2 had their caliper fitted at the front on the right side (viewed sitting on the bike) a swapped front end due to a collision could have happened in the past.
