drewpy

try the INOX web site the sr250 might be the same as the 500

4 secs for me

should be obvious, the xs400 speedo mirrors the casting on the opp side. the disk has a big hole in the middle to go over the speedo drive!!

invest in a cheap bench grider and get a set of polishing mops. you can do mirror finishes in an hour or so. nice work though, now you have gorilla arms

sounds knackered mate. you shouldn't be able to push it up at all. the run out limit is 0.1mm (0.004in) according to the yam service manual. new head and cam cover ( matched pair) is needed, unless you can line bore them and retro fit bearings.

I think we need to help Goff with her wedding Tunes for the big day! lets hear your top 5 and bottom 5 top 1) All of my my Love - Led Zeppelin 2) You Shook Me all Night Long – AC/DC 3) Beautiful day - U2 4) Forever - KISS 5) Close Your Eyes Forever - Ozzy Osbourne & Lita Ford bottom 1) paranoid - black sabbath 2) white wedding - billy Idol 3) another one bites the dust - queen 4) heaven knows I'm miserable now - smiths 5) She F*%$ing Hates Me - Puddle of Mudd

not sure i did a step by step, but it is very easy... yam wheel has a cover on opp side of hub and pry this off to reveal the machined holes for another disk. 1) fit another disk 2) you need a left hand early type lower fork part. they have a fitting for another caliper mount 3) use a caliper and mount from an SR500 . these are the same as xs400 right side, but it says left or "L" on it 4) buy 1 longer brake pipe and a double banjo fitting for the master cylinder 5) use master cylinder from an xs750, 850 or XS1100 twin disk bike. I would rebuild it with new seals 6) bleed system for 2 hours and there you have a twin disk set-up drewps

doesn't really break, as bearings take the rotational wear. it would be cheaper to buy a whole bike

Ebay gone mad. thi part makes it more expensive than the bike HERE

have you checked the gap between camshaft and head/cover? sounds like they are worn, maybe due to worn oil pump not providing enough pressure!!

that'll be foamy in the background

Yep, rear is 2.15 and I have a 4:00 tyre for that, but I needing a couple of rubber bungs tp fill in the rim-lock holes

I'd check out her cream buns first!!

go to www.triple-s.co.uk

roger decosta was a 70's scramble superstar (motocross its called now) he had these amazing boots with chromed shin pads and toe tips on his boots. All the Goths ended up wearing them though just done a google and there's nothing on the guy except a painting, wierd!

no idea, its protecting it at the mo' till its nearly finished ,than I'm going to clean it off!!

done drewps

you can get any thing to fit if you really want it bad. the bigger bikes run 19" on front and 18" on rear I've just put a 3:50 tyre on my flat tracker front and it looks funky chunky!! and on a 1.85 rim

I took the cap off my sparkie to run on 1 cylinder ( for testing) and the bugger zapped me. Me being the easiest way to earth check the caps are screwed on tight and in the HT lead centre. I can touch my leads with the plugs attached and not get a belt.

to the forum and many happy smiles on your new steed

Tim, I'd check that the breather hose (rear of engine, behind the starter cover) is not kinked or blocked, this releases the pressure from the gearbox/crank area and the cam chain shaft (which goes into the rocker box). If that is clear then you will need to do a pressure test as this would be the easiest thing to do next. let us know how you get on drewps

was it a good show OG? the heaton one was Ok'ish ( too new methinks) might go to that, next year

what about toothpaste? Not tried it, so not guaranteed

nice jawa at heaton park

cakes go hard when old, biscuits go soft when old Barkwind, whats with the blue twig in your avatar?