Everything posted by drewpy
-
Rebuilt vacuum petcock, but...
MMM, last time I rebuilt the petcock it leaked. Can't remember what I did to fix it though, I got an old one in me bitz box somewhere, give me till tomorrow and i'll dismantle it and check for you Drewps
- Hi Guys!
-
i really didn't want her to do that!
I'd say, carbs, exhaust, prop shaft lines/cables etc lie the bike on the side (everythng else is taken off) and lift the frame off the bike! why not send it for pwder coating. triple-s in bingley is not too far and don't charge much. they blast it and cover all the threads. here
-
FAO the Jocks
still sunday Isn't it John?
-
Advice after cleaning carbs.
fully charged battery. that's all I can think of except switch on the ignition
-
Yamaha XS250 Engine Change.
xs400 will fit in with no mods
-
England World cup effort gets boost
and little Frank
-
Getting painting done.
-
XS 400 hesitating on the pipe
I'd check the the ignition timming starting with the points gap using dwell if you have one. then strobe the bike drewps
-
every picture telld a story dont it
is OG on the run again?
-
theoriginaltwistgrip signs up
A-OOP david good intro! I like the triples especially the grey ones. electrics are the bugbear of the triples. Lots of the xs and rd range parts bins will cross over, just need to do a visual check. I have xs1100 brakes on mine, sounds good, but they are exactly the same as a 400 just the extra disk fitted and larger bore Master cylinder. SR calipers are the same and live on the left hand side while xs400/250 are on the right ( inc carrier) drewps
-
POR-15 Gas Tank Sealer/rust remover Treatment
can't you stick a stick oop the hole protruding into the tank?
- scumbags
-
Gas tank cleaning?
wrap the tank in rags and wedge it in a cement mixer!! that'll get the stuff all over for minimum effort
-
'78 XS400 ignition switch question
to me (i've had a few pints at this point) red, blue and brown are connected when the switch is in the "on" mode in park "P" mode, Red and blue are connected which enables the lights to work independantly of ignition. my igntion switch had a fourth wire to the main beam switch, which i soldered in
- Wierd Bikes
- Hi all newbi
- Hello!
-
FYI XS400 minor niggle
i kick the bike on no stands, astride the beast!
- Dumb Ass Tonto !
-
Happy Birthday alexigno
buon compleanno Boss! nice pressie England winning today!!
-
1980 XS400 Clutch doesn't engage till 99% let out
you could turn the socket and screwdriver so it all come out and then see if the nut is damaged
-
hello from romania
cristian if you want to post a want, please use the wanted section thankyou very much for your interest in the YOC
-
'78 XS400 ignition switch question
if its blue i think it will be headlamp. get a online manual located in the xs400 sticky in the classic section (pioneerx links works)
-
XS 400 Bobber - work in process
looks sic I'd change the pipes to straight thru with internal baffles and I like wraps on the downpipes