drewpy

could be a sticking clutch, try spinning the back wheel by hand and change the gears? with the other!

brilliant

thats the point Kev, Its a long term project for my son for when he's 16. Already got a suppiler (bob wright)and the spares situation is really healthy

its actually about 3 miles from squires, so technically its already there

pick it up saturday, so i can get more info then

cheers Paul, did a quick googley should be a good resto when i get round to it

well you know how it goes. managed to talk the wife around this as a bike for my son when he is 16(in 3 years) so i got meself a gilera 50cc thingy, looks cool and will be my next project when I finish the tracker! meanwhile I can start collecting parts info etc. anyone know what model it is?

doing 25 gives an indictor that they are looking to turn sometimes soon. experience dictates that i would keep back or flash them to let them know someone is behind! yes I know its a pain but that's what's needed to survive

got me thoughts together regarding switches for the dipped lights and horn and have been playing around with brake banjo bolts and micro switches from Maplins. I figured that they can drive 2 solenoids under the seat for the amps. the banjo bolts can replace the lower lever clamps on the bars using a drill and cutting a new thread anyway here's the pikkies what I'm on about... I think i need to find a suitable rubber hood to go over the switch and around the 1st part of the bolt, any ideas where to get one?

thought it was this one..

nothing about replacing them! does say assemble with molybdenum disulfide to the threaded portions of bolts, nuts and nut seats

not another one!!! to the YOC Sye

nope! just checked me yam service manual and it says: "use bearings of identical color for assembly (for both connecting rod and journal bearings)" did you try speed sport?

reuse them , if they leak get new ones!!

the numbers are on the crank web and case housing numbers as per haynes manual. nothing on the con rod for you to worry about! those bolts are expensive and I had to send off to speed sport to get mine! I since got a set on ebay but I think that was a one off!!

Told you

looking at those pikkies, I was breathing in the fresh air AHHHH! look like you had a fantastic time, bet you were missing the forum though

barsteward

:lol:

I got 600 metres http://www.e4.com/game/vampire-kittens/play.e4

well done foam's you'll soon be getting them birds you so long for...

loved t his one, go Fred <object width="480" height="385"><param name="movie" value="http://www.youtube.com/watch?v=dRUS5VfkJls?fs=1&amp;hl=en_US"></param><param'>http://www.youtube.com/watch?v=dRUS5VfkJls?fs=1&amp;hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/watch?v=dRUS5VfkJls?fs=1&amp;hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

this is better <object width="480" height="385"><param name="movie" value="http://www.youtube.com/watch?v=4Da12MiXaVo?fs=1&amp;hl=en_US"></param><param'>http://www.youtube.com/watch?v=4Da12MiXaVo?fs=1&amp;hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/watch?v=4Da12MiXaVo?fs=1&amp;hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

no particular way round, don't use grease, it'll smoke and burn and it stinks. should just pop in and quickly install them.

to the YOC Chris Stevens, we're glad to have you "on board"