drewpy

gave it too much gas leaned over, i think he might be showing off a bit in front of the crowd.

age yourself 20 or 30 years and see what you look like!

nice to see you back Jim !

Ask OG about unsuitable footwear, he's the resident expert

as a last resort, try putting some brake fluid in the other end of the master cylinder the pressure you are experiencing seems to indicate that the seals are sealing. It might just need some fluid on the other side for it to work, same as back flushing it!

loosen the banjo connector to bleed the fluid through to prime the cyl.

might try that meself tomorrow (on someones elses bike though)

get yourself a 70's bike then, it'll hold its value and you'll have fun too

Taking into account that the caliper is ok, you need to prime the master cylinder with fluid on "the other side", my mate is having the same problems ATM and I must admit, mine took a while to bleed my brakes on the xs. It helps if you have a 3rd hand, get someone to pull the lever whilst opening the bleed screw and shutting off before the lever returns. I have also had to suck the fluid through using a clear pipe so as not to drink the stuff drewps

Kev can play with his for hours slut machine

I see Blackie has a starring role!

I saw it on Monday and it was ace, even got to see a bit of the NW200 (couldn't see me though) the camera pointing down on the opening shot did my head in as i wanted to see what was comming up (typical bike rider I suppose) He (Guy Martin) was obsessed with wanking too

I lke a bit of AC DC talk in this forum

to the forum

to the forum

to the forum

to the forum

to the forum

to the forum

to the forum

to the forum

to the forum

to the forum

to the forum

ha ha no chance, poor girl. I think you'll need an R1 side car in graphite to the forum