Jump to content

Featured Replies

Posted

Not mine but m8s RD125LC. He's deciding to take test after 20yrs o me aggin him :D he decided to get 125 and ride this for six

month, and take lessons and ride at the same time, fair do's...

Problem. He managed to get the bike to run right after re-jetting and re-jet and ermmm re-jeting . And now has a leaking cylinder head gasket :huh:

So he rang me the other nite and dreamt of fitting a Big Bore Kit while the head was off ;) ( as you do :D )

So here is the Big question. Can you still buy Bore Kits for these?

How Much?

And where?

I will happily pass on any info...

Big Bore Kits, i remember my MB50 65cc Ortisa bore kit -60mph- at 16, sweet :D

  • 5 months later...

you can get the standard 10w00 barrel liner taken out and get the barrel re linered to a bigger size then you need to get the cylinder head machined to match the bore size then get the squish re cut

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...