Kayla Posted March 30, 2008 Share Posted March 30, 2008 (edited) Hi, I know it's in the wrong bit of the forum,Yep!, Edited July 12, 2015 by Cynic Selling. Link to comment Share on other sites More sharing options...
redd Posted April 3, 2008 Share Posted April 3, 2008 Hi im looking for the V5 if you have one to sell, dont want the frame just the paperwork xs250-360-400 Link to comment Share on other sites More sharing options...
Kayla Posted April 5, 2008 Author Share Posted April 5, 2008 Hi im looking for the V5 if you have one to sell, dont want the frame just the paperwork xs250-360-400 Sent you a PM redd. I'm only down the road in Washington if you wanted to collect it. Link to comment Share on other sites More sharing options...
ayee129 Posted April 7, 2008 Share Posted April 7, 2008 Hi, I know it's in the wrong bit of the forum, but I thought it would get more views and be more use in this bit I'm breaking my XS250 C (wire wheels and drums), and I have the following parts available; The headlight and complete front and rear ends are already spoken for, sorry. Engine, complete and running Exhaust headers in decent condition Silencers in decent condition Standard 'square' tank, painted in silver Hammerite (why?), there are a few little dents that will fill ok. Has cap, tap and a key. XS400 Custom tank, badly painted matt black, but the actual tank is in very good condition. The 'Yamaha' logos have been removed and the gaps filled (not by me). Comes with cap, tap and a key Side panels Clocks Centrestand Sidestand That's about it I think, the frame got chopped at the rear and is probably not much use to anyone (unless you're building a tracker or a bobber) but you're welcome to it for free if you collect. I can post the other stuff but the engine will have to be collected. Thank you Kayla do you still have the centre stand as Iam looking for one. Link to comment Share on other sites More sharing options...
Guest grisler54 Posted April 8, 2008 Share Posted April 8, 2008 Hi, I know it's in the wrong bit of the forum, but I thought it would get more views and be more use in this bit I'm breaking my XS250 C (wire wheels and drums), and I have the following parts available; The headlight and complete front and rear ends are already spoken for, sorry. Engine, complete and running Exhaust headers in decent condition Silencers in decent condition Standard 'square' tank, painted in silver Hammerite (why?), there are a few little dents that will fill ok. Has cap, tap and a key. XS400 Custom tank, badly painted matt black, but the actual tank is in very good condition. The 'Yamaha' logos have been removed and the gaps filled (not by me). Comes with cap, tap and a key Side panels Clocks Centrestand Sidestand That's about it I think, the frame got chopped at the rear and is probably not much use to anyone (unless you're building a tracker or a bobber) but you're welcome to it for free if you collect. I can post the other stuff but the engine will have to be collected. Thank you Kayla I'm looking for a good solid seat base for my 78 xs250. Link to comment Share on other sites More sharing options...
Kayla Posted April 8, 2008 Author Share Posted April 8, 2008 I'm looking for a good solid seat base for my 78 xs250. I think I still might have the seat at my boyfriend's parents' house, I'll have a look tomorrow. Link to comment Share on other sites More sharing options...
Kayla Posted April 9, 2008 Author Share Posted April 9, 2008 I'm looking for a good solid seat base for my 78 xs250. I still have the seat if you want the base from it Kayla Link to comment Share on other sites More sharing options...
Guest grisler54 Posted April 10, 2008 Share Posted April 10, 2008 I still have the seat if you want the base from it Kayla Hi Kayla, yep I still need a seat base, is it pos to have some pics to see the condition, say from the top, bottom and a side view would be very much appreciated. Also how much for it and postage cost. Cheers graham Link to comment Share on other sites More sharing options...
Kayla Posted April 12, 2008 Author Share Posted April 12, 2008 Hi Kayla, yep I still need a seat base, is it pos to have some pics to see the condition, say from the top, bottom and a side view would be very much appreciated. Also how much for it and postage cost. Cheers graham Hi Graham, Sorry, the seat base is rotten. My boyfriend brought it round yesterday and it's beyond saving. Sorry to get your hopes up. Ali, your centrestand is in the post today. Link to comment Share on other sites More sharing options...
Guest grisler54 Posted April 12, 2008 Share Posted April 12, 2008 Hi, I know it's in the wrong bit of the forum, but I thought it would get more views and be more use in this bit I'm breaking my XS250 C (wire wheels and drums), and I have the following parts available; The headlight and complete front and rear ends are already spoken for, sorry. Engine, complete and running Exhaust headers in decent condition Silencers in decent condition Standard 'square' tank, painted in silver Hammerite (why?), there are a few little dents that will fill ok. Has cap, tap and a key. XS400 Custom tank, badly painted matt black, but the actual tank is in very good condition. The 'Yamaha' logos have been removed and the gaps filled (not by me). Comes with cap, tap and a key Side panels Clocks Centrestand Sidestand That's about it I think, the frame got chopped at the rear and is probably not much use to anyone (unless you're building a tracker or a bobber) but you're welcome to it for free if you collect. I can post the other stuff but the engine will have to be collected. Thank you Kayla Do you still have the Exhaust headers & Silencers, how many miles on clock. Link to comment Share on other sites More sharing options...
Kayla Posted April 13, 2008 Author Share Posted April 13, 2008 Do you still have the Exhaust headers & Silencers, how many miles on clock. Yes, I still have those and they are in pretty good condition. The clocks that came with the bike are showing a little over 21000 miles. Link to comment Share on other sites More sharing options...
ayee129 Posted April 21, 2008 Share Posted April 21, 2008 Hi, I know it's in the wrong bit of the forum, but I thought it would get more views and be more use in this bit I'm breaking my XS250 C (wire wheels and drums), and I have the following parts available; The headlight and complete front and rear ends are already spoken for, sorry. Engine, complete and running Exhaust headers in decent condition Silencers in decent condition Standard 'square' tank, painted in silver Hammerite (why?), there are a few little dents that will fill ok. Has cap, tap and a key. XS400 Custom tank, badly painted matt black, but the actual tank is in very good condition. The 'Yamaha' logos have been removed and the gaps filled (not by me). Comes with cap, tap and a key Side panels Clocks Centrestand Sidestand That's about it I think, the frame got chopped at the rear and is probably not much use to anyone (unless you're building a tracker or a bobber) but you're welcome to it for free if you collect. I can post the other stuff but the engine will have to be collected. Thank you Kayla hi just wondering when you sent the centerstand as I have paid for it and have not received it yet? can you let me know thanks Ayee Link to comment Share on other sites More sharing options...
Recommended Posts