Posted November 9, 200717 yr My XS360...Well, I can't seem to find any new oem or good used carb. joints, intake manifolds or carb. holders. All the same thing, don't know why so many names.... I'm either going to try patching these up,,or,,buy some new ones on e-bay for the XS400. Different p/n's. Any one of you Yamaha gurus think it's worth a chance ?. There is sure no way for me to compare or ask around here. Many thanks for the past help !!!!
November 9, 200717 yr Moderator My XS360...Well, I can't seem to find any new oem or good used carb. joints, intake manifolds or carb. holders. All the same thing, don't know why so many names.... I'm either going to try patching these up,,or,,buy some new ones on e-bay for the XS400. Different p/n's. Any one of you Yamaha gurus think it's worth a chance ?. There is sure no way for me to compare or ask around here. Many thanks for the past help !!!! you have 34mm carbs which should fit the 34mm 400cc intakes. I can measure both circumferences on my spare set if you like? for reassurance. drewpy
November 10, 200717 yr Author you have 34mm carbs which should fit the 34mm 400cc intakes. I can measure both circumferences on my spare set if you like? for reassurance. drewpy Drewpy,, Again, Thank you very much !!. Those measurements would sure help if it's not a lot of trouble. I bought the XS400 set and I'll know in a few days when they arrive. The Gent said if they don't fit I can send them back wich was extremely nice of him.. I thought there might be a difference in diameter or bolt hole placement. Hope I luck out. Many Thanks Pard !!!
November 10, 200717 yr Moderator Drewpy,, Again, Thank you very much !!. Those measurements would sure help if it's not a lot of trouble. I bought the XS400 set and I'll know in a few days when they arrive. The Gent said if they don't fit I can send them back wich was extremely nice of him.. I thought there might be a difference in diameter or bolt hole placement. Hope I luck out. Many Thanks Pard !!! ok.... centre - stud hole to hole = 67mm engine side orafice =32mm carb side orafice = 42mm depth = 35mm
November 10, 200717 yr Author ok.... centre - stud hole to hole = 67mm engine side orafice =32mm carb side orafice = 42mm depth = 35mm Got it,, Thanks. I'll see how these measure up..( Find my Metric ruler )
April 16, 200816 yr Harv did you ever check and see if the dimensions of the xs400 carb were the same as the 360?
April 16, 200816 yr Author Yes,, I put a post in here some where awhile back. The Carb. joints for the XS400 fit my XS360 perfectly. Different part numbers,, so the part numbers can be misleading.. I got mine on E Bay.. Thumbs up !!!
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.