Posted August 9, 200717 yr having been sat a while I got the old bike out of the shed fresh fuel, batt and plugs. after a few days I discovered that the remote throttle stop screw was usless so I improvised with a small bolt, which holds it in the right place, however when I start it up it backfires then settles its self to a steady 1000rpm,s then for some reason revs its self to 3500rpm,s and sits there, the throttle linkage does not move so I'm at a loss as to why it does this. anyone got any ideas? les
August 9, 200717 yr You either have a sticking throttle cable or you have an air leak after the carb. Try the cable first.
August 9, 200717 yr Author You either have a sticking throttle cable or you have an air leak after the carb. Try the cable first. cheers yoda took carbs off (again) cleaned them put back on tight seems to have cured rev prob, lost me bolt again so hand held revs only, but seems okay cheers. les
_33963e.png)
_83bc35.png)
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.