Flysafe Posted December 13, 2006 Share Posted December 13, 2006 Hi, I'm going to repair one side of a motocicle that have words, so I'll have to pull out two letters. Does anyone knows the respective font of this letters. YAMAHA / DELTA BOX / EXUP Thunderace 1000. Thanks you all Link to comment Share on other sites More sharing options...
tont2002 Posted December 16, 2006 Share Posted December 16, 2006 Hi mate, Not sure that they are specific fonts, you may have to re-create them, i can send you the yamaha text, and i might have the thunderace text somewhere, but havent got the other 2. Not too much help again. lol Steve Link to comment Share on other sites More sharing options...
DamoR1 Posted December 20, 2006 Share Posted December 20, 2006 Hello Mate Why bother keeping it standard ? make a few changes and stand out from the crowd a bit !!! keep it safe and fast pal !!! Damo Link to comment Share on other sites More sharing options...
Robbie Posted December 21, 2006 Share Posted December 21, 2006 Just tape the letters up then repair it. the majority of the welding or patch work (depending on how you are repairing it) will be on the back. When you come to paint it shouldn't be a problem then unpeal it ready for the laquer so there are no problems. Have done this to all the bikes Ive had to repair at work due to customers not wanting to pay the extra for new decals. Regards Link to comment Share on other sites More sharing options...
Moderator drewpy Posted December 21, 2006 Moderator Share Posted December 21, 2006 try sunrise graphics, got a pair of decals made up for my xs400 for £15. not really expensive!! http://www.sunrisegraphics.co.uk/ Link to comment Share on other sites More sharing options...
Admin Alex Posted December 26, 2006 Admin Share Posted December 26, 2006 Just take the part to a place which do vinyl graphics they can just recreate it... would only cost £15-20 Or as previously said you may be able to get away with just some good masking Link to comment Share on other sites More sharing options...
Flysafe Posted January 7, 2007 Author Share Posted January 7, 2007 Hello mate, Thank you all for the tips, and, I sorry to replay now. What I really need it´s the two letter’s of YAMAHA text, because, I have to remove the letter YA. Steve and Robbie I made the letters using two software’s, Rhinoceros (similar to the AutoCAD), and Corel Draw. Damo Thanks for the tip, but the owner wants the original letters. I tried. Drewpy Very good site thanks. Alexasigno I made the letters and print in vinyl, for free, in the place were I usually made my prints. I add two images for all see, I only repair with fiber, don’t paint. Regards Jorge Lopes Link to comment Share on other sites More sharing options...
Guest Tomg Posted January 7, 2007 Share Posted January 7, 2007 so, what was the point of that? Link to comment Share on other sites More sharing options...
Flysafe Posted January 7, 2007 Author Share Posted January 7, 2007 Hi, Tomg, when I need help I don’t see you around, what’s the point of or affirmation? Kind regards Jorge Lopes Link to comment Share on other sites More sharing options...
Recommended Posts