Hi,

I'm going to repair one side of a motocicle that have words, so I'll have to pull out two letters. Does anyone knows the respective font of this letters. YAMAHA / DELTA BOX / EXUP Thunderace 1000.

Thanks you all

Hi mate,

Not sure that they are specific fonts, you may have to re-create them, i can send you the yamaha text, and i might have the thunderace text somewhere, but havent got the other 2.

Not too much help again. lol

Steve

Hello Mate

Why bother keeping it standard ?

make a few changes and stand out from the crowd a bit !!!

keep it safe and fast pal !!!

Damo

Just tape the letters up then repair it. the majority of the welding or patch work (depending on how you are repairing it) will be on the back. When you come to paint it shouldn't be a problem then unpeal it ready for the laquer so there are no problems.

Have done this to all the bikes Ive had to repair at work due to customers not wanting to pay the extra for new decals.

Regards

try sunrise graphics, got a pair of decals made up for my xs400 for £15.

not really expensive!!

http://www.sunrisegraphics.co.uk/

Just take the part to a place which do vinyl graphics they can just recreate it... would only cost £15-20

Or as previously said you may be able to get away with just some good masking

Hello mate,

Thank you all for the tips, and, I sorry to replay now.

What I really need it´s the two letter’s of YAMAHA text, because, I have to remove the letter YA.

Steve and Robbie

I made the letters using two software’s, Rhinoceros (similar to the AutoCAD), and Corel Draw.

Damo

Thanks for the tip, but the owner wants the original letters. I tried.

Drewpy

Very good site thanks.

Alexasigno

I made the letters and print in vinyl, for free, in the place were I usually made my prints.

I add two images for all see, I only repair with fiber, don’t paint.

Regards

Jorge Lopes

so, what was the point of that?

Hi,

Tomg, when I need help I don’t see you around, what’s the point of or affirmation?

Kind regards

Jorge Lopes