Anyone know where to by upgrade parts such as camshaft, valves air filter etc.

(EU)

Not really the kind of thing people do to the 1100.

From a horsepower point of view its no superstar its only 60hp or so. Not sure you would notice the benefit. Its no rev monster and that's what you need for cam and head work. 

You could regrind the cams you have I suppose and a good engineer can make a square peg fit a round hole if you have the brass. 

Honestly with image being everything on these I would think a turbo would be just as effective and look better

2 hours ago, Cynic said:

Not really the kind of thing people do to the 1100.

From a horsepower point of view its no superstar its only 60hp or so. Not sure you would notice the benefit. Its no rev monster and that's what you need for cam and head work. 

You could regrind the cams you have I suppose and a good engineer can make a square peg fit a round hole if you have the brass. 

Honestly with image being everything on these I would think a turbo would be just as effective and look better

The reason it only has 60 ish horsepower is the reason to boost it a little, since the rest of the work will make it look faster 😂

the performance cam will make 15+ horsepower and it takes around 2h, to change.

but turbo sounds like a good idea to 😊

It seems quite difficult to put a turbo on a bike with carburetor 🤔

A blower may be easier...

16 hours ago, Oscar. Dragstar said:

It seems quite difficult to put a turbo on a bike with carburetor 🤔

Plenty out there, bandits and gsxr's have been turbo's forever.