Hi Guy's  I have a 1990 535  I have replaced the wiring loom with one from a breaker's they claimed was the right year, it's fitted BUT The manual show's the wire's from the stater connect to one of the unit's below the right hand side of the fuel tank via the loom BUT there is no connecting block near the battery box to connect it to anybody got any idea what i should do ?

Stator's usually have 4 wires (in one cable sheathing/loom) coming out of them (3 phases and an earth). I'd find out what this wire goes to. If the other wires on the stator are the same colour (yellow perhaps?) then it may well be the earth.

 

You need to get sight of a wiring diagram, so you can see what it goes to.