Nickm95 Posted May 24, 2018 Share Posted May 24, 2018 Hi there, just joined the site. I recently bought a 2009 WR125 and the engine light is permanently on, not flashing. The last owner said this happened when somebody knocked the bike over. Im also having problems with the neutral light, sometimes the bike doesn't recognise when it is in neutral. Any help would be greatly appreciated. The bike seems to be running well. Many thanks, Nick Link to comment Share on other sites More sharing options...
blackhat250 Posted May 25, 2018 Share Posted May 25, 2018 Hi nick " , lots of bikes sumtimes dont find neutral , even if the light is on, is the position of the selector drum, just not quite in the correct p[lace,, my old 400 does it now and again, As for the engine light, it need plugging in to a diagnostic lap top , to clear the fault sensor,, Link to comment Share on other sites More sharing options...
mike1949 Posted May 26, 2018 Share Posted May 26, 2018 (edited) Welcome to the forum Nick. Mike Edited May 26, 2018 by mike1949 Link to comment Share on other sites More sharing options...
Nickm95 Posted May 29, 2018 Author Share Posted May 29, 2018 Thanks for the replies guys, I will take the bike in to get them to connect to the diagnostics. In regards to the neutral light, is there any adjustment that I can do on the box? Ive taken the switch out and tested it and it seems to work. Although maybe these can wear down? It won't start unless it recognises its in neutral even with the clutch in. Thanks again Link to comment Share on other sites More sharing options...
Recommended Posts