alan riddell Posted May 9, 2018 Share Posted May 9, 2018 hi folks trying to pull of flywheel .got puller on but wont budge . any suggestions. ta alan Link to comment Share on other sites More sharing options...
finnerz89 Posted May 9, 2018 Share Posted May 9, 2018 Could well have bearing lock on it. Have you got a heat gun you can warm it up with? Link to comment Share on other sites More sharing options...
alan riddell Posted May 10, 2018 Author Share Posted May 10, 2018 13 hours ago, finnerz89 said: Could well have bearing lock on it. Have you got a heat gun you can warm it up with? hi fin tried heating but no joy flywheel really solid .looked at videos of taking of seems simple .cant think what I'm doing wrong thanks alan Link to comment Share on other sites More sharing options...
finnerz89 Posted May 10, 2018 Share Posted May 10, 2018 35 minutes ago, alan riddell said: hi fin tried heating but no joy flywheel really solid .looked at videos of taking of seems simple .cant think what I'm doing wrong thanks alan Have you got the correct workshop manual? Could be something else holding it on Link to comment Share on other sites More sharing options...
neversaydie Posted May 10, 2018 Share Posted May 10, 2018 Have a look at the schematic for the bike on the CMSNL web site, might show up something else holding it on. If theres nothing, then leave the puller on pulling, soak it in release oil (or diesel if you not got any) tap the end of the draw bolt every few hours over a period of a few days, and as said above, give it a bit of heat. Sometimes, you need patience with these things Link to comment Share on other sites More sharing options...
Recommended Posts