Posted May 9, 20187 yr hi folks trying to pull of flywheel .got puller on but wont budge . any suggestions. ta alan
May 10, 20187 yr Author 13 hours ago, finnerz89 said: Could well have bearing lock on it. Have you got a heat gun you can warm it up with? hi fin tried heating but no joy flywheel really solid .looked at videos of taking of seems simple .cant think what I'm doing wrong thanks alan
May 10, 20187 yr 35 minutes ago, alan riddell said: hi fin tried heating but no joy flywheel really solid .looked at videos of taking of seems simple .cant think what I'm doing wrong thanks alan Have you got the correct workshop manual? Could be something else holding it on
May 10, 20187 yr Have a look at the schematic for the bike on the CMSNL web site, might show up something else holding it on. If theres nothing, then leave the puller on pulling, soak it in release oil (or diesel if you not got any) tap the end of the draw bolt every few hours over a period of a few days, and as said above, give it a bit of heat. Sometimes, you need patience with these things
_33963e.png)
_83bc35.png)
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.