Dan"hero"Turner Posted May 1, 2018 Share Posted May 1, 2018 Hi all, new here. So... I have been rebuilding a 1999 R6 that came to me as part of a deal, it already had LED rear integrated indicators. I fitted new LED front ones. Took it for an MOT and the indicators work fine with no lights on, but when you turn on the lights they go very slow or not at all. Now I am no good with electrics but have read similar posts on here that suggest it is a bad earth. I have no idea, I thought the battery was crap. It's been a labour of love but now I am getting the hump. I just want to be out on it. How do I check the earth or remedy the problem? Thanks guys, ride safe. Dan Link to comment Share on other sites More sharing options...
blackhat250 Posted May 1, 2018 Share Posted May 1, 2018 Hi dan ,, find the loom earth, and clean the contact suface, has frame been powercoated, of fresh paint, Link to comment Share on other sites More sharing options...
Dan"hero"Turner Posted May 2, 2018 Author Share Posted May 2, 2018 (edited) I dont believe so. Where will the loom earth be connected to the frame? Thanks Edited May 2, 2018 by Dan"hero"Turner Spelling mistake Link to comment Share on other sites More sharing options...
blackhat250 Posted May 2, 2018 Share Posted May 2, 2018 Dont know about your model,, but most of mine were a black loop bolted to the frame [ under tank] next to the coil. Link to comment Share on other sites More sharing options...
Recommended Posts