burton500 Posted February 25, 2018 Share Posted February 25, 2018 I’ve got a project bike and I need to remove the blind needle roller bearing inside the left hand crankcase. It’s the one the gearbox layshaft sits in. I don’t have a puller but has anyone managed to get the bearing out by any other means? Cheers Lee Link to comment Share on other sites More sharing options...
Moderator drewpy Posted February 25, 2018 Moderator Share Posted February 25, 2018 yep, use an eye anchor bolt and a bit of heat around the casing. Then use a slide hammer did it on my old Gilera Link to comment Share on other sites More sharing options...
burton500 Posted March 1, 2018 Author Share Posted March 1, 2018 Cheers, will give it a try Link to comment Share on other sites More sharing options...
blackhat250 Posted March 2, 2018 Share Posted March 2, 2018 Are you shure you want to repace that bearing, they run in oil , very little wear, , and are near impossible to find, or have you soarsed one, 1 Link to comment Share on other sites More sharing options...
Recommended Posts