MT03Tim Posted October 29, 2017 Share Posted October 29, 2017 Hi, I have an 07 MT03 (the proper 660 single) and yes there are a few still on the road! 2 weekends ago I was out for a ride and saw according to my speedo I was doing 188 mph and 0 revs. So I stopped, and restarted the bike hoping the problem was not terminal...... it was - the whole display was dead. No neutral, indicator, main beam, nuffing (Later on closer inspection a chip on the printed circuit had blown) So as Mr Yamaha wanted £440 for a new one , after a lot of searching I managed to get one from a breakers . It works fine except that when I start the engine the display and rev dial goes blank for a few seconds. At first I thought it could be that the bike had been standing for a while and the battery was at 12.6 volts, but even when fully charged it happens I did have a chat with my local Yam dealer and they said it was a straightforward plug the new one in. My question is ' has anybody else had the same issue when replacing the instrument cluster on any Yam?' If so have you managed to fix it Link to comment Share on other sites More sharing options...
Recommended Posts