rusty07 Posted September 10, 2017 Share Posted September 10, 2017 Hello, live on the south coast and restoring a yamaha dt125r, 1988. Owned for 13 years and nearly finished but would like better panels than I have. Although an 88 model is fitted with raspberry red bodywork and the colour change was registered with the DVLA in 1991 so would like to keep the same. Would very much appreciate any links or advice to source what I need, exhausted all other avenues (ebay, fowlers, cmsl, yambits, etc,etc) Have been thorough in the rebuild and top plastic would finish it properly. Thanks Oldman Link to comment Share on other sites More sharing options...
blackhat250 Posted September 10, 2017 Share Posted September 10, 2017 Hi rusty, panels are scarce, [ nos] thers a guy on this forum, has some , maybe for your model, click on link, http://yamahadtclub.proboards.com/ Link to comment Share on other sites More sharing options...
Oldman Posted September 11, 2017 Share Posted September 11, 2017 Thanks for the tip, went over and registered, scouring as we speak! Link to comment Share on other sites More sharing options...
AndPhil Posted September 12, 2017 Share Posted September 12, 2017 Hello! My 2011 ybr125 seems to be picking up rust and mechanial quirks at a fair rate - a 1988 bike must be a whole different challenge. I was on Brighton seafront earlier today gathering more salty air which no doubt helps... Link to comment Share on other sites More sharing options...
Oldman Posted September 16, 2017 Share Posted September 16, 2017 It did take a while to clean near on 30 years of grime from the nooks and crannies prior to powdercoating and rebuilding. Have 99%finished bar the panels, tried posting a picture here but upload limit prevents me despite using smallest file size? Just took each component and did the best I could, happy with the result and should last longer than me! Link to comment Share on other sites More sharing options...
Oldman Posted September 23, 2017 Share Posted September 23, 2017 Managed to resize photos, slight hiccup as inlet rubber split as I was preparing to take for mot, replacement ordered so still not ridden, at one point hoping to have finished by mid July so October not a bad overrun! Have the correct graphics btw, on my to do list! 1 Link to comment Share on other sites More sharing options...
2 Wheels Posted September 27, 2017 Share Posted September 27, 2017 Nice and well done. They are exactly the same plastics as the dt125r up to the year 2003, just a different colour. Link to comment Share on other sites More sharing options...
Recommended Posts